Search found 21 matches
- Mon May 11, 2020 5:52 pm
- Forum: Microscopes and optics
- Topic: Taking Apart Dialux Trinocular Head
- Replies: 4
- Views: 2641
Re: Taking Apart Dialux Trinocular Head
Anybody know what this plug is for. The wires inside seem to lead to some sort of shutter...
- Mon May 11, 2020 5:28 pm
- Forum: Microscopes and optics
- Topic: Taking Apart Dialux Trinocular Head
- Replies: 4
- Views: 2641
Re: Taking Apart Dialux Trinocular Head
For those who have the same Leitz FSA Phototube, the replacement that I ordered (Which fits perfectly) was a 4T5/245 Timing Belt. It Is 245 mm long, has a T5mm pitch, 4mm width, and 49 teeth.
- Sun May 10, 2020 4:41 pm
- Forum: Camera systems and imaging
- Topic: Raspberry Pi High Quality Camera
- Replies: 32
- Views: 13275
Re: Raspberry Pi High Quality Camera
Please forgive the pedantry, but, according to Sony it is a 1/2.3 sensor ... which is significantly smaller than 1/2 [but still a very useable size] Apologies. You are correct. My brain is suffering from information overload! My problem is I need to use a corrective eyepiece to pair with my Leitz p...
- Sat May 09, 2020 10:38 pm
- Forum: Camera systems and imaging
- Topic: Raspberry Pi High Quality Camera
- Replies: 32
- Views: 13275
Re: Raspberry Pi High Quality Camera
Hey Guys, Given the size of this camera (it's pretty damn small), might it be the best option to position it at the intermediate image plane? Or should I have some sort of optics in the Trinocular photo tube and position the sensor above the photo tube. The sensor 1/2" , so I assume I would need som...
- Sat May 02, 2020 1:37 am
- Forum: Microscopes and optics
- Topic: Taking Apart Dialux Trinocular Head
- Replies: 4
- Views: 2641
Taking Apart Dialux Trinocular Head
Quite annoyingly, the adjustment knob on my Dialux trinocular head that allows for redirecting of light either to eyepieces or photo tube broke yesterday. No matter how much you turn it, nothing happens. So, I took apart the trinocular head and found that there is a toothed rubber belt that has worn...
- Sat May 02, 2020 1:14 am
- Forum: Camera systems and imaging
- Topic: Raspberry Pi High Quality Camera
- Replies: 32
- Views: 13275
Raspberry Pi High Quality Camera
:Anybody else noticed this announcement https://www.engadget.com/raspberry-pi-1 ... 45607.html
I've pre-ordered and will be attempting to develop it into an imaging platform.
I've pre-ordered and will be attempting to develop it into an imaging platform.
- Wed Apr 29, 2020 2:45 am
- Forum: Microscopes and optics
- Topic: In the market for new oculars, any suggestions?
- Replies: 5
- Views: 2689
Re: In the market for new oculars, any suggestions?
So I bought two Periplan 12.5x Oculars. One GF 12.5x M and One GF 12.5x/18. I now know that the GF 12.5x M is incompatible with my Dialux 20 EB without a spacer ring TL160. Anybody know where I can find this part or a reasonable hack? Otherwise I think I have to return this ocular...
- Tue Apr 28, 2020 1:53 pm
- Forum: Microscopes and optics
- Topic: Leitz PL APO vs NPL Fluorotar
- Replies: 8
- Views: 4764
Leitz PL APO vs NPL Fluorotar
Hi guys, Sorry if this has already been asked but: Is it worth the extra bucks to pick up APO lenses and skip the Fluorotar lenses. How big is the difference? Also, why are Leitz lenses in the 170 mm tube length so much cheaper than the 160mm? Also, can Fluorotar and APO lenses be mixed and matched ...
- Tue Apr 21, 2020 9:31 pm
- Forum: Microscopes and optics
- Topic: In the market for new oculars, any suggestions?
- Replies: 5
- Views: 2689
Re: In the market for new oculars, any suggestions?
https://www.ebay.com/itm/LEITZ-WETZLAR-GERMANY-GF-12-5X-PERIPLAN-EYEPIECE-MICROSCOPE-PART-OPTICS-6-A-08/153435939352?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D226054%26meid%3D9e0f68d922144cd1b3508d04de7dd6b4%26pid%3D100005%26rk%3D4%26rkt%3D12%26mehot%3Dpf%26sd%3D153435939361%...
- Tue Apr 21, 2020 9:18 pm
- Forum: Microscopes and optics
- Topic: In the market for new oculars, any suggestions?
- Replies: 5
- Views: 2689
Re: In the market for new oculars, any suggestions?
I mean, they dont sell the exact correcting lenses for these scopes correct? Are there any alternatives?
- Tue Apr 21, 2020 8:37 pm
- Forum: Microscopes and optics
- Topic: In the market for new oculars, any suggestions?
- Replies: 5
- Views: 2689
In the market for new oculars, any suggestions?
I'm looking to spend under $200, and preferably would like oculars that will fit my zeiss standard, IM35 and Leitz Dialux 20 EB. Are higher end oculars something I should splurge on, or should I focus on other things if I am eventually overhauling the whole scope.
- Tue Apr 21, 2020 8:13 pm
- Forum: Microscopes and optics
- Topic: Leitz Dialux EB
- Replies: 1
- Views: 1433
Re: Leitz Dialux EB
Nevermind, I think the reason was the filter set on the fluorescence light source adapter. This is annoying though, will I have to take off the fluorescent housing "arm" each time I want to do white light microscopy??
- Tue Apr 21, 2020 7:34 pm
- Forum: Microscopes and optics
- Topic: Leitz Dialux EB
- Replies: 1
- Views: 1433
Leitz Dialux EB
Hi Guys, I have a dialux EB that I just set up. For some reason, the voltage reading on the front of the stand is only reading 3v and the light seems awful yellow... Does anybody know what might be causing this? I checked the fuses inside for continuity and everything seemed fine. The bulb is super ...
- Sun Apr 19, 2020 8:01 pm
- Forum: Microscopes and optics
- Topic: Zeiss Standard Microscope and Mirror Woes
- Replies: 6
- Views: 2776
Re: Zeiss Standard Microscope and Mirror Woes
So I ended up ordering both the stainless dental mirror (which will get here next month) and these : https://www.ebay.com/itm/Plymor-Square-3mm-Beveled-Glass-Mirror-5-inch-x-5-inch-Pack-of-6/202901789629?hash=item2f3de39bbd:g:J34AAOSw4cFeQOMK I'll try removing the quick and dirty method of producing...
- Sun Apr 19, 2020 7:53 pm
- Forum: Microscopes and optics
- Topic: High CRI LEDs - Olympus True Color, Nichia Optisolis and Yuji VTC D50
- Replies: 20
- Views: 7522
Re: High CRI LEDs - Olympus True Color, Nichia Optisolis and Yuji VTC D50
So the Zeiss Standard I have seems to have the collector lens and frosted glass built into the female part of the light tube. So would I just have to adjust the distance between the LED and the frosted glass/ collector lens until I can get an image of the LED centered on the condenser front focal pl...
- Sat Apr 18, 2020 6:02 pm
- Forum: Microscopes and optics
- Topic: High CRI LEDs - Olympus True Color, Nichia Optisolis and Yuji VTC D50
- Replies: 20
- Views: 7522
Re: High CRI LEDs - Olympus True Color, Nichia Optisolis and Yuji VTC D50
Thank you sir! Looks like I have some reading to do
- Sat Apr 18, 2020 2:41 pm
- Forum: Microscopes and optics
- Topic: High CRI LEDs - Olympus True Color, Nichia Optisolis and Yuji VTC D50
- Replies: 20
- Views: 7522
Re: High CRI LEDs - Olympus True Color, Nichia Optisolis and Yuji VTC D50
Now ... to answer your original question: It probably depends on the optics of your illuminator. If it’s designed for a compact filament, I think you will be disappointed. So right now I don't have an illuminator. My stepfather closed down his lab 20 years ago and has two Zeiss IM35 Inverted Scopes...
- Fri Apr 17, 2020 7:23 pm
- Forum: Microscopes and optics
- Topic: High CRI LEDs - Olympus True Color, Nichia Optisolis and Yuji VTC D50
- Replies: 20
- Views: 7522
- Fri Apr 17, 2020 7:15 pm
- Forum: Microscopes and optics
- Topic: High CRI LEDs - Olympus True Color, Nichia Optisolis and Yuji VTC D50
- Replies: 20
- Views: 7522
Re: High CRI LEDs - Olympus True Color, Nichia Optisolis and Yuji VTC D50
Hey guys, this retailer sells small quantities of the Nichia Optisolis LEDs: https://www.virence.com/ I'm considering getting 4 soldered by them onto their VR21P4 MCPCB: https://static.wixstatic.com/media/5b2572_60ac57f4604f43b4bfb7bbb1e69bd141~mv2_d_1400_1400_s_2.jpg/v1/fill/w_500,h_500,al_c,q_85,u...
- Sun Apr 12, 2020 7:39 pm
- Forum: Microscopes and optics
- Topic: Zeiss Standard Microscope and Mirror Woes
- Replies: 6
- Views: 2776
Re: Zeiss Standard Microscope and Mirror Woes
Thanks! Yeah I read this post before. My only concern is that shipping from China may be delayed right now due to current events and I'm pretty impatient!
- Sun Apr 12, 2020 3:49 pm
- Forum: Microscopes and optics
- Topic: Zeiss Standard Microscope and Mirror Woes
- Replies: 6
- Views: 2776
Zeiss Standard Microscope and Mirror Woes
Has anybody tried this quick and dirty method of making a FSM?
[youtube]https://www.youtube.com/watch?v=IaEaaeajCSI[/youtube]
My Zeiss standard has a 45 degree mirror that is completely shot. I have an old mirror laying around from a recent bathroom remodel and figured i'd give it a try.
[youtube]https://www.youtube.com/watch?v=IaEaaeajCSI[/youtube]
My Zeiss standard has a 45 degree mirror that is completely shot. I have an old mirror laying around from a recent bathroom remodel and figured i'd give it a try.