Search found 3154 matches
- Tue Jun 11, 2019 2:00 pm
- Forum: Illumination Techniques
- Topic: PZO DIC with MPI-3 and KPI-2
- Replies: 18
- Views: 12391
Re: PZO DIC with MPI-3 and KPI-2
Hi Phil, from what I know the head from the ebay link is the MPI-5 with a different type of lever and some other differences to the MPI-3 and MPI-2 heads. My DIC head is really named MPI-3. I have seen complete kits with box that include one head and two condensers, slit and revolver. This would pro...
- Tue Jun 11, 2019 9:18 am
- Forum: Resources (online, books etc.)
- Topic: R.M.S. die.
- Replies: 22
- Views: 18223
Re: R.M.S. die.
Hi Michael, 0,003 inch tolerance is 0,0762mm, this is actually a comparatively coarse tolerance for todays standards. At the time this standard was defined the lathes will have looked "somewhat" different though. I couldn't find a date for this standard. Maudsleys invented the lead screw around 1800...
- Tue Jun 11, 2019 8:17 am
- Forum: Illumination Techniques
- Topic: PZO DIC with MPI-3 and KPI-2
- Replies: 18
- Views: 12391
PZO DIC with MPI-3 and KPI-2
Hi together, I place this in a separate thread: From PZO there are upper DIC units named MPI-2, MPI-3 (the one I have) and MPI-5 (looks different than the two before). The revolver condenser seems to be always KPI-2. In the internet I found a description of the newest system for the Biolar, with MPI...
- Tue Jun 11, 2019 7:43 am
- Forum: Resources (online, books etc.)
- Topic: R.M.S. die.
- Replies: 22
- Views: 18223
Re: R.M.S. die.
Hi Phil, cutting the thread with a die would lead to quite big cutting forces. I'm not sure that the barrel really is intended to withstand them. On the other hand side sigle point cutting on the lathe is a very fine process when done in several cuts (and always stopped before the shoulder). For thi...
- Mon Jun 10, 2019 8:26 pm
- Forum: Resources (online, books etc.)
- Topic: R.M.S. die.
- Replies: 22
- Views: 18223
Re: R.M.S. die.
Hi Phil, here RMS taps and dies are offered: https://www.baercoil.com/pdf/Gewindebohrer2014EN.pdf Price on request, propably dirt cheap! :mrgreen: I don't know what quality would be to expect there. It isn't an established manufacturer, maybe better chinese quality? Are you up to an interesting proj...
- Mon Jun 10, 2019 6:22 pm
- Forum: Illumination Techniques
- Topic: dIY DIC
- Replies: 68
- Views: 39489
Re: dIY DIC
Hi together, concerning PZO DIC: There are upper DIC units named MPI-2, MPI-3 (the one I have) and MPI-5 (looks different than the two before). The revolver condenser seems to be always KPI-2. In the internet I found a description of the newest system for the Biolar, with MPI-5, KPI-2 and additional...
- Mon Jun 10, 2019 6:01 pm
- Forum: My microscope
- Topic: Olympus VT-II Stereo Microscope
- Replies: 7
- Views: 8254
Re: Olympus VT-II Stereo Microscope
Hi Bryan, congratulations to the new stereo microscope! You will probably find lots of uses for it. I would really really miss mine, at home and at work. I have an (I think) older Olympus model, the nuclear reactor design type. I use it with 10x eyepieces which resolve everything the objectives have...
- Mon Jun 10, 2019 7:27 am
- Forum: Beginner's corner
- Topic: First Stain, and mounting
- Replies: 7
- Views: 4216
Re: First Stain, and mounting
1. Is it normal to have the cover slip rock? The slides I used were beveled edge flat slides. 2. Is there a way to get the stain to penetrate into intact cells? 3. Once finished I assume I clean and reuse both the slide and cover slip? 4. I noticed that the stage movement controls on the Microscope...
- Sun Jun 09, 2019 7:10 pm
- Forum: Illumination Techniques
- Topic: dIY DIC
- Replies: 68
- Views: 39489
Re: dIY DIC
Hi Fan, I have just assembled a PZO DIC set consisting of revolver condenser and MPI-3 (?) head. For a while now I am working on my office/lab room and work is not yet finished, most things are covered and not available. So I only had a quick try with the set and a 1960s cream white PZO MB 30 with s...
- Sun Jun 09, 2019 6:05 am
- Forum: Specimens, samples and slides
- Topic: Slide mounting media for a beginner - observations
- Replies: 24
- Views: 15055
Re: Slide mounting media for a beginner - observations
Hi John, your slide making is on an extraordinary quality level and I always enjoy your posts where you openly explain your methods! For the beginner it is good to understand that scientific value and personal enjoyment can already be gained from slides that are very crude compared to what the best ...
- Sun Jun 09, 2019 5:22 am
- Forum: Illumination Techniques
- Topic: dIY DIC
- Replies: 68
- Views: 39489
Re: dIY DIC
[quote="zzffnn"]DIY oblique gets difficult over 40x NA 0.65 and does not produce the same contrast DIC produces. My own (years of) test results showed that DIY oblique can provide decent visual 3D effects at high power, but such effects cannot be easily captured with camera. So for me, if I were to ...
- Sat Jun 08, 2019 8:47 pm
- Forum: Specimens, samples and slides
- Topic: Slide mounting media for a beginner - observations
- Replies: 24
- Views: 15055
Re: Slide mounting media for a beginner - observations
For me it is important to learn to prepare slides, be it temporary or permanent. When microscopy consists of observing a set of ready made slides interest will faint soon. (Unless you have a really big slide collection of cause). It is like 3D-printing without the ability to design ones own 3D-model...
- Sat Jun 08, 2019 8:29 pm
- Forum: Illumination Techniques
- Topic: dIY DIC
- Replies: 68
- Views: 39489
Re: dIY DIC
Hi Heather, these filter tricks work differently well with different microscopes. Also it is always necessary to do some fiddling to get the best image so repeatability or even quick repeatability is not really available. On the other hand side a real DIC setup is also difficult (and expensive!) to ...
- Sat Jun 08, 2019 5:22 am
- Forum: Beginner's corner
- Topic: Which Microscope?
- Replies: 28
- Views: 18535
Re: Which Microscope?
Hi Dave, I have a pair of binoculars from Bresser, 8x20, model "Corvette",new price 90€, was tested by "Stiftung Warentest" with result "good". The lenses are made in Japan. It is actually quite good and has costs me just 8€ including shipping used on ebay. So there are good products in their lineup...
- Fri Jun 07, 2019 7:48 pm
- Forum: Beginner's corner
- Topic: Which Microscope?
- Replies: 28
- Views: 18535
Re: Which Microscope?
Hi Dave, it is nice to see that they both stick to sensible magnifications - this inspires a lot more trust in the usability of the microscope. The Apex includes a nice compact travel case which would be very nice to take the instrument with you on trips or to meetings. I wouldn't trust too much in ...
- Fri Jun 07, 2019 7:18 pm
- Forum: Specimens, samples and slides
- Topic: Slide mounting media for a beginner - observations
- Replies: 24
- Views: 15055
Re: Slide mounting media for a beginner - observations
Hi Heather, thank you for sharing your experiences with mounting media! There is much room for new solutions, especially widely available ones. Some thoughts about the media you use: -Hoyers medium: It lightens some specimens over time, e.g. whole insects. One component makes it dangerous to swallow...
- Fri Jun 07, 2019 1:37 pm
- Forum: Microscopes and optics
- Topic: A new [to me] word learned today
- Replies: 6
- Views: 2629
Re: A new [to me] word learned today
http://www.microscope-antiques.com/browningplaty.html Just for info. I scanned the advert from an excellent little book, recently purchased 'Through a Pocket Lens' by Henry Scherren F.Z.S. second impression, 1904 MichaelG.[/quote] Hi Michael, thank you for the link! There are some for sale on ebay ...
- Fri Jun 07, 2019 1:32 pm
- Forum: Off Topic
- Topic: Micscape online Magazine
- Replies: 27
- Views: 26769
Re: Micscape online Magazine
One big advantage of sites like Micscape is that interesting information is archived and easy to find. In forums the interesting part is often difficult to find and time consuming to extract. My impression is that at the beginning of private internet in the mid-90s much information was presented as ...
- Wed Jun 05, 2019 11:17 am
- Forum: Miscellaneous
- Topic: Chinese inspection camera
- Replies: 10
- Views: 6251
Re: Chinese inspection camera
Hi 75RR, may be I have missed it but I only saw the typical exepiece cameras. With inspection camera I connect something small and endoscope like. What I always find interestig is the way the english clubs organize their meetings: The meetings seem to consist of separate exhibits and flea market sta...
- Tue Jun 04, 2019 6:53 pm
- Forum: Specimens, samples and slides
- Topic: Tried glycerin to slow down fast movers
- Replies: 36
- Views: 26183
Re: Tried glycerin to slow down fast movers
I've got a hand crank centrifuge for two quite big glasses, ca. 15x100mm. This will probably do. Otherwise we have an electric one in our group lab available. Centrifuging is a nice process step, not messy, no fumes and no waste. Thank you for showing these filters, Doron! I have heard of membrane f...
- Tue Jun 04, 2019 4:36 pm
- Forum: Specimens, samples and slides
- Topic: Tried glycerin to slow down fast movers
- Replies: 36
- Views: 26183
Re: Tried glycerin to slow down fast movers
I ended up spinning it very fast which made a ton of difference, I could see all the crap pelleted at the bottom and a very nice clear solution on top which I collected and placed in a separate vial. It seems clean looking at it through the scope. Hi Wes, so you first centrifugated first and then f...
- Sun Jun 02, 2019 5:13 pm
- Forum: Pictures and Videos
- Topic: Sodium ascorbate
- Replies: 6
- Views: 4180
Re: Sodium ascorbate
Hi Wes,
beautiful crytal image!
I always find it astonishing that even these seemingly flat crystals have a depth structure and hills and valleys.
Bob
beautiful crytal image!
I always find it astonishing that even these seemingly flat crystals have a depth structure and hills and valleys.
Bob
- Sun Jun 02, 2019 1:19 pm
- Forum: My microscope
- Topic: IOR ML-4M
- Replies: 21
- Views: 15073
Re: IOR ML-4M
Hi Farmazon, I would suggest a different adaptation over a pancake camera lens like the old Pentax M 40mm 1:2,8 for APS C. The picture shows a Nikon 1J5 with 18.5mm lens directly adapted to an eyepiece for glasses wearer. This is much shorter and I can just pull out an eyepiece of the bino tube and ...
- Sat Jun 01, 2019 8:53 pm
- Forum: Pictures and Videos
- Topic: My first diatom stack
- Replies: 14
- Views: 5679
Re: My first diatom stack
Hi Doron, this is what I would expect and I wouldn't worry about 1%. Fit for purpose, acceptable price and available for everybody. It is great to have a common test plate that arrives at you doorstep without hunting ebay auctions etc. To save costs the manufacturers tend to just barely deliver what...
- Sat Jun 01, 2019 5:40 pm
- Forum: Pictures and Videos
- Topic: My first diatom stack
- Replies: 14
- Views: 5679
Re: My first diatom stack
There it is: A satisfying chinese product! If one could depend more on the quality it would become difficult for us to compete...75RR wrote:Very happy with it.
I have a chinese object micrometer: Also very satisfying for my needs (haven't checked the absolute accuracy)
Bob
- Sat Jun 01, 2019 12:02 pm
- Forum: Pictures and Videos
- Topic: My first diatom stack
- Replies: 14
- Views: 5679
Re: My first diatom stack
Here is a PDF with eyepiece reticules: https://drive.google.com/open?id=1bVYdt_zQeBmGGidVmVnlIJo6722zLXRQ It works with 80% of the eyepieces I tested. In most cases there is a convenient spot to put the reticule on. Real measuring eyepieces provide focusing to get a perfectly sharp image of the reti...
- Sat Jun 01, 2019 7:26 am
- Forum: Pictures and Videos
- Topic: Shell picking from Red Sea sand
- Replies: 45
- Views: 19804
Re: Shell picking from Red Sea sand
are even used to direct sideways drilling Hi 75RR, 25 years ago I applied for a job in a copmany producing drilling equipment. At this point of time they communicated with the drilling head by means of pressure pulses in the water supply to the head. It's fascinating to hear that foraminifera are s...
- Sat Jun 01, 2019 7:22 am
- Forum: Pictures and Videos
- Topic: My first diatom stack
- Replies: 14
- Views: 5679
Re: My first diatom stack
Hi Wes, you can print one with a laser printer on overhead projection film. Under magnification these laser prints don't look too nice but as a scale this works acceptably. Ink jet might even be better.Wes wrote:but not an eyepiece graticle.
So there is no reason to deny us the measurement!
Bob
- Sat Jun 01, 2019 6:58 am
- Forum: My microscope
- Topic: IOR ML-4M
- Replies: 21
- Views: 15073
Re: IOR ML-4M
The parfocal business is driving me up the walls. I have (now) a manufacturer's photo tube with projection eyepieces, but i can't achieve parfocality whatever i do. Varying the distance between the camera and the mount - the tube length does nothing with respect to focus. The image is still defocus...
- Fri May 31, 2019 4:35 pm
- Forum: Pictures and Videos
- Topic: Shell picking from Red Sea sand
- Replies: 45
- Views: 19804
Re: Shell picking from Red Sea sand
Does digging deeper into a beach sand bank offer ancient forams? Hi Charlie, foraminifera can be used to research the movement of coast lines. When you bore a hole with a hollow drill you can part it in layers, clean it ( I think with H2O2) and look whether and which foraminifera are there. Our mic...