Eyepiece Adapter For DSLR
Eyepiece Adapter For DSLR
This over the microscope eyepiece adapter will be used with my canon dslr. At home depot I first looked at pvc fittings and I could not find anything that would work real good since I don`t have a lathe, but in the electrical connectors and fittings I found these parts.
At this time everything looks good and it will work, I will need to test it out more for sure.
The parts are around 10 bucks, what is needed is a little time and some good straight cuts and a little sanding.
Most of the building process can be seen from these photo`s with the purchased parts first.
Rodney
At this time everything looks good and it will work, I will need to test it out more for sure.
The parts are around 10 bucks, what is needed is a little time and some good straight cuts and a little sanding.
Most of the building process can be seen from these photo`s with the purchased parts first.
Rodney
- Attachments
-
- DSLR Camera Adapter 004.jpg (215.55 KiB) Viewed 6778 times
Re: Eyepiece Adapter For DSLR
Parts laid out.
- Attachments
-
- DSLR Camera Adapter 006.jpg (211.03 KiB) Viewed 6777 times
Re: Eyepiece Adapter For DSLR
More views.
- Attachments
-
- DSLR Camera Adapter 009.jpg (191.42 KiB) Viewed 6777 times
-
- DSLR Camera Adapter 009.jpg (191.42 KiB) Viewed 6777 times
Re: Eyepiece Adapter For DSLR
Photo 018 is some scrap left over.
- Attachments
-
- cut off scrap
- DSLR Camera Adapter 018.jpg (184.12 KiB) Viewed 6776 times
-
- DSLR Camera Adapter 017.jpg (188.88 KiB) Viewed 6776 times
-
- DSLR Camera Adapter 014.jpg (203.26 KiB) Viewed 6776 times
-
- DSLR Camera Adapter 012.jpg (201.96 KiB) Viewed 6776 times
-
- DSLR Camera Adapter 011.jpg (208.64 KiB) Viewed 6776 times
Re: Eyepiece Adapter For DSLR
The last two photo`s
Rodney
Rodney
- Attachments
-
- DSLR Camera Adapter 020.jpg (182.35 KiB) Viewed 6774 times
Re: Eyepiece Adapter For DSLR
When I get the exact measurement this will be put in place.
Rodney
Rodney
- Attachments
-
- DSLR Camera Adapter 022.jpg (190.73 KiB) Viewed 6772 times
Re: Eyepiece Adapter For DSLR
Less time at the eyepiece and more time away! Tsk Tsk
How will you finally attach it to the Canon and I hope you are keeping the back lens of the adapter covered when not taking photos.
JimT
How will you finally attach it to the Canon and I hope you are keeping the back lens of the adapter covered when not taking photos.
JimT
Re: Eyepiece Adapter For DSLR
Gentle but slightly snug fit Jim, mounted on this bogen tripod, the heavy weight door stop microscopes hold this adapter up rather well, for 10 bucks it is very sturdy.
My last measurement added a simple sleeve for 4 parts in all. I forgot to take the photo of it before installation.
Rodney
My last measurement added a simple sleeve for 4 parts in all. I forgot to take the photo of it before installation.
Rodney
- Attachments
-
- DSLR Camera Adapter 028.jpg (225.58 KiB) Viewed 6743 times
Re: Eyepiece Adapter For DSLR
Two or three photos of the finished product. This cheap adapter seems to be very sturdy. I chose one of my door stop microscopes to mount it on because of the very heavy base of these old scopes.
Rodney
Rodney
- Attachments
-
- DSLR Camera Adapter 034.jpg (196.95 KiB) Viewed 6731 times
-
- DSLR Camera Adapter 033.jpg (229.72 KiB) Viewed 6731 times
-
- DSLR Camera Adapter 029.jpg (240.81 KiB) Viewed 6731 times
- Crater Eddie
- Posts: 1858
- Joined: Wed Nov 12, 2014 4:39 pm
- Location: Illinois USA
Re: Eyepiece Adapter For DSLR
Very interesting. The proof of the pudding will be in the imaging. Be sure to post images taken with it.
CE
CE
Olympus BH-2 / BHTU
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
Re: Eyepiece Adapter For DSLR
No doubt to take images. I have the camera back on the tri- pod now, I find it a lot easier to point the camera at something while I try to learn some of the technical stuff and work the controls, since this is my first dslr.
With the rest of the equipment I have I find it unlikely that any of my photos will be as good as some of the ones we see lately. But some of them could be ok. What I find out and about and take usable photos will be mostly what I do, and if I can obtain a surprise photo that will be good also.
Rodney
With the rest of the equipment I have I find it unlikely that any of my photos will be as good as some of the ones we see lately. But some of them could be ok. What I find out and about and take usable photos will be mostly what I do, and if I can obtain a surprise photo that will be good also.
Rodney
Re: Eyepiece Adapter For DSLR
Bonjour.
Très belle réalisation.
Comme quoi avec peu de moyen on peu réaliser des adaptateurs pour son microscope.
En tout cas belle réalisation et merci pour le partage.
Cordialement seb
Très belle réalisation.
Comme quoi avec peu de moyen on peu réaliser des adaptateurs pour son microscope.
En tout cas belle réalisation et merci pour le partage.
Cordialement seb
Microscope Leitz Laborlux k
Boitier EOS 1200D + EOS 1100D
Boitier EOS 1200D + EOS 1100D
Re: Eyepiece Adapter For DSLR
What lens is in your home made adapter? Why use the camera lens when you have the lens in the adapter? So, viewing through both lenses gives you a suitable image?
Edit: Enlarging one of your pictures, I see the lens is a WF eyepiece, so you are using it as an afocal setup?
Edit: Enlarging one of your pictures, I see the lens is a WF eyepiece, so you are using it as an afocal setup?
Re: Eyepiece Adapter For DSLR
Correct, if I decided to use another eyepiece I just pull that one out and insert another one, as such eyepiece adapter.
Works fine.
Rodney
Works fine.
Rodney
Re: Eyepiece Adapter For DSLR
Just a note,,I mostly use B&L wide field eyepieces 95 percent of the time. The diameter across the top of these eyepieces are not the same as a few other oculars I have so I made this adapter to fit those eyepieces I mostly use. In this case all of the weight load is across the top of the eyepiece.
Rodney
Rodney