want a microtome blade holder design drawing

Here you can discuss DIY adaptations to the microscope.
Post Reply
Message
Author
92111
Posts: 170
Joined: Thu Jul 26, 2018 8:45 am

want a microtome blade holder design drawing

#1 Post by 92111 » Sun Mar 22, 2020 9:42 am

I dont know any sizes and angles of microtome blade holder.I want a microtome blade holder design drawing,then DIY a blade holder on the internet (TaoBao).
Attachments
下载.jpg
下载.jpg (8.29 KiB) Viewed 2990 times

MichaelG.
Posts: 3976
Joined: Mon Apr 10, 2017 8:24 am
Location: North Wales

Re: want a microtome blade holder design drawing

#2 Post by MichaelG. » Sun Mar 22, 2020 9:51 am

Too many 'projects'

MicroBob
Posts: 3154
Joined: Sun Dec 25, 2016 9:11 am
Location: Northern Germany

Re: want a microtome blade holder design drawing

#3 Post by MicroBob » Sun Mar 22, 2020 12:27 pm

Typical single use blades have an included angle between micro bevels of 35°. So the blade has to be inclined to minimum 17,5° plus 1°-5° relief angle.

Post Reply