MicrobeHunter.com Microscopy Forum

I dont know any sizes and angles of microtome blade holder.I want a microtome blade holder design drawing,then DIY a blade holder on the internet (TaoBao).

These might give you some clues:

https://www.labce.com/spg605385_instrum ... ngles.aspx

https://www.leicabiosystems.com/knowled ... microtomy/

MichaelG.

Typical single use blades have an included angle between micro bevels of 35°. So the blade has to be inclined to minimum 17,5° plus 1°-5° relief angle.