How is fixed column on bottom of this Wild stand (374924) ?
How is fixed column on bottom of this Wild stand (374924) ?
Hello,
Any body knows how is fixed vertical column of this Wild double arms stand: a M10 nut of another system?
Thank you
Any body knows how is fixed vertical column of this Wild double arms stand: a M10 nut of another system?
Thank you
Re: How is fixed column on bottom of this Wild stand (374924) ?
Do you mean what clamps the carrier post at the tilt you want: at the top end of the silver column holding the microscope in the following picture?
Hmmm. Not only have I answered your question with a question, I found a photograph that manages to hide the adjustable clamp lever you may be asking about.
Hmmm. Not only have I answered your question with a question, I found a photograph that manages to hide the adjustable clamp lever you may be asking about.
-John
Re: How is fixed column on bottom of this Wild stand (374924) ?
Thank you but no, I mean on the bottom of the vertical column (holding the dual arm), under the very heavy white metal part on your picture....
Sorry my first ask was not very clear!
Sorry my first ask was not very clear!
Re: How is fixed column on bottom of this Wild stand (374924) ?
I found four ISO 4762 M8x70mm, blackened steel, hexagon socket head cap screws. I believe the screws are in blind, threaded holes.
This would be for the older, more massive variant (with a 50mm rear post) of the stand pictured above.
This would be for the older, more massive variant (with a 50mm rear post) of the stand pictured above.
-John
Re: How is fixed column on bottom of this Wild stand (374924) ?
Thank you, but I wonder if the more recent system (with 25mm/30mm diameter column) as in the picture, has the same system?
Re: How is fixed column on bottom of this Wild stand (374924) ?
From the looks of it, I would think the 25/30mm takes smaller, top side screws.
-John
Re: How is fixed column on bottom of this Wild stand (374924) ?
Yes it could be plausible
-
- Posts: 2808
- Joined: Sat Mar 03, 2018 9:09 pm
Re: How is fixed column on bottom of this Wild stand (374924) ?
If it helps the equivalent system from Diagnostic Instruments holds the column onto the base with one giant bolt through the bottom.
Re: How is fixed column on bottom of this Wild stand (374924) ?
Hello,
I've got the answer, having seen one of this Wild stand: only three M5 blackened steel, hexagon socket head cap screws
I've got the answer, having seen one of this Wild stand: only three M5 blackened steel, hexagon socket head cap screws