MicrobeHunter.com Microscopy Forum

You can also access this page with: www.microscopy-forum.com
It is currently Wed Jun 26, 2019 10:38 am

All times are UTC




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Tue Jun 04, 2019 12:11 am 
Offline

Joined: Wed Mar 27, 2019 6:39 am
Posts: 31
Hi,
I would like to find the pin outs for the 6-pin connector to a Leica LED lamp. Any pointers would be appreciated. Thanks.


Attachments:
Leica LH111DM4000-6000.png
Leica LH111DM4000-6000.png [ 29.67 KiB | Viewed 351 times ]
Top
   
PostPosted: Thu Jun 06, 2019 8:02 pm 
Offline

Joined: Thu May 09, 2019 12:27 am
Posts: 13
Have you reached out to Technical Services at Leica. You can find the local office via the website. www.leica-microsystems.com
I'm not sure what you are trying to do, but keep in mind the controlling electronics are located in the base of the DM4K/DM6K


Top
   
PostPosted: Mon Jun 10, 2019 8:15 pm 
Offline

Joined: Wed Mar 27, 2019 6:39 am
Posts: 31
Sure I can try Leica. But normally you just get a sales person and they don't want to waste time on such things.


Top
   
PostPosted: Thu Jun 13, 2019 4:25 am 
Offline

Joined: Thu May 09, 2019 12:27 am
Posts: 13
Sales will not spend time on questions of pin outs, that is the domain of the repair service and you need to get to that part of the operation. You also need to be sure that is where you problem originates. If you have a failure, is it due to the electronics that drive the illumination source,.
Wayne


Top
   
PostPosted: Thu Jun 13, 2019 4:50 pm 
Offline

Joined: Sat Mar 03, 2018 9:09 pm
Posts: 263
I have had some luck with Leica, which surprised me. Their sales people did redirect me to technical support for some questions, many of which they could answer. Surprised me, given how small my order was and how I'm clearly not a big fish.
Then again, they gave me the wrong part number and I ended up buying a ~250$ serial cable instead of the part I needed (they did send a prepaid return label and give me my money right back) and they never got me the right number, so results were mixed.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited