Page 1 of 1

Phototube needed to connect Leitz diaplan with Canon EOS 5d mark III

Posted: Wed Jul 10, 2019 9:40 am
by Orionpepai
Goodday,

How is everybody doing?

I was hoping you guys could help me out. I am looking for the right phototube to connect a leitz diaplan with a Canon EOS 5d mark III. The tube on top has a diameter of 37 mm. Any suggestions? I am currently drowning in all the options and terms for i am quite new at this.

Sincerely,
Jennifer

Re: Phototube needed to connect Leitz diaplan with Canon EOS 5d mark III

Posted: Wed Jul 10, 2019 10:31 am
by 75RR
I suppose the first choice you have to make is whether to go 'afocal' or 'direct projection'

http://www.krebsmicro.com/pdf/trinoc_a3.pdf

There are more articles on the main site: http://www.krebsmicro.com

Re: Phototube needed to connect Leitz diaplan with Canon EOS 5d mark III

Posted: Wed Jul 10, 2019 10:34 am
by Roldorf
You should ask einman he has a Leitz Diaplan with what looks like a camera mounting on the phototube.

See here: viewtopic.php?t=6034

Hope that helps he may be able to tell you where he got it, or how he did it and what the part number is.

Re: Phototube needed to connect Leitz diaplan with Canon EOS 5d mark III

Posted: Wed Jul 10, 2019 8:36 pm
by mrsonchus
Hi, here's a link to a post of mine showing the whole kit of Leitz parts for connection fo DSLR to Leitz 'scope..

The first post at the top, has an image of the entire assembly....