Distant relatives, tolerating one another.
- Crater Eddie
- Posts: 1858
- Joined: Wed Nov 12, 2014 4:39 pm
- Location: Illinois USA
Distant relatives, tolerating one another.
A few folks have asked about Boris lately, so I just had to get him down off his shelf tonight and give him a workout. Here you see Boris on the right, sharing the lab bench with Mr Moto, on the left. I'm not sure I really like this arrangement, but it will do for now I guess. I have to keep them some distance apart, or they start calling each other names.
I have had some success with Boris's magnification changer alignment over the last few months... that is I'm not sure it's really better than it was, but at least I haven't made it noticeably worse.
CE
I have had some success with Boris's magnification changer alignment over the last few months... that is I'm not sure it's really better than it was, but at least I haven't made it noticeably worse.
CE
Olympus BH-2 / BHTU
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
Re: Distant relatives, tolerating one another.
Пожалуйста, сохраняйте спокойствие !! ..
BillT
BillT
Re: Distant relatives, tolerating one another.
Nice to see Boris again ... glad to see he is keeping well!
Trying to recall ... was that due to using the head from another model?I have had some success with Boris's magnification changer alignment over the last few months... that is I'm not sure it's really better than it was, but at least I haven't made it noticeably worse.
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)
Olympus E-P2 (Micro Four Thirds Camera)
- Crater Eddie
- Posts: 1858
- Joined: Wed Nov 12, 2014 4:39 pm
- Location: Illinois USA
Re: Distant relatives, tolerating one another.
It appeared to me that a previous owner of the trinoc had twiddled all the adjustment screws on the lens assemblies inside the LOMO magnification changer as evidenced by many scratches left by screwdrivers and / or other tools of destruction, as well as distortions in the images. I have been slowly re adjusting the lowest mag lens adjustment attempting to get it more properly in line. It is a frustrating process, so I mess with it a while, then put it away for a while.75RR wrote:Trying to recall ... was that due to using the head from another model?
I did buy another LOMO trinoc, a very nice one, but it turned out to be for an infinity system.
CE
Olympus BH-2 / BHTU
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
- Crater Eddie
- Posts: 1858
- Joined: Wed Nov 12, 2014 4:39 pm
- Location: Illinois USA
Re: Distant relatives, tolerating one another.
みんなパニック!billbillt wrote:Пожалуйста, сохраняйте спокойствие !! ..
BillT
CE
Olympus BH-2 / BHTU
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
- Crater Eddie
- Posts: 1858
- Joined: Wed Nov 12, 2014 4:39 pm
- Location: Illinois USA
Re: Distant relatives, tolerating one another.
CE
Olympus BH-2 / BHTU
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB