Getting rid of a few things, among them is this Slide Holder (looks like it might be for a Pol Stage) which I must have picked up along with something else.
Anyway, I would like to know what make of stage it would fit.
Anyone have any ideas?
Pins are 3mm diameter as is the screw.
Distance between the first pin and the holding screw is 16mm
Distance between the first pin and the second pin is 72mm
Pol Stage Slide Holder ID?
Pol Stage Slide Holder ID?
- Attachments
-
- Slide Holder-4.jpg (92.78 KiB) Viewed 2420 times
-
- Slide Holder-3.jpg (114.56 KiB) Viewed 2420 times
-
- Slide Holder-2.jpg (127.05 KiB) Viewed 2420 times
-
- Slide Holder-1.jpg (79.96 KiB) Viewed 2420 times
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)
Olympus E-P2 (Micro Four Thirds Camera)
Re: Pol Stage Slide Holder ID?
Ran it to ground. It is a Märzhäuser Wetzlar object guide AK3 that goes on a Z150 rotating Stage.
https://www.marzhauser.com/en/pim/produ ... lter=pnull
https://www.marzhauser.com/en/pim/produ ... lter=pnull
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)
Olympus E-P2 (Micro Four Thirds Camera)