XY Coordinate System on a slide
XY Coordinate System on a slide
What is a recommended method of it yourself method to partition of a slide into an XY Coordinate System? Or a method to mark areas on a slide after a sample has been placed on a slide?
1) OMAX 40X-2500X 18MP USB3 Plan Phase Contrast Trinocular LED with Turret Phase Disk
2) AmScope Trinocular Stereo, 3.5X-90X Magnification Four-Zone LED Ring Light
2) AmScope Trinocular Stereo, 3.5X-90X Magnification Four-Zone LED Ring Light
Re: XY Coordinate System on a slide
You can buy a "locator slide" or "finder slide" slide that has a grid of coordinates ruled on it. To locate a point of interest, your slide is carefully removed from the stage without disturbing the position of the mechanical stage, then the finder slide is mounted on the stage, again carefully so as not to disturb the mechanical stage. Then, the coordinates can be recorded.
These slides are expensive. The least expensive one found in a brief search is sold by Electron Microscopy Sciences in Pennsylvania:
https://www.emsdiasum.com/microscopy/te ... 72266.aspx
Scrolling down to the Product Information link brings up the catalog entry with price of $95.
These slides are expensive. The least expensive one found in a brief search is sold by Electron Microscopy Sciences in Pennsylvania:
https://www.emsdiasum.com/microscopy/te ... 72266.aspx
Scrolling down to the Product Information link brings up the catalog entry with price of $95.
Rick
A/O 10 Series Microstar
A/O 4 Series Microstar
A/O 4 Series Phasestar
A/O 4 Series Apostar
A/O Cycloptic Stereo
Several old monocular scopes in more or less decrepit but usable condition
A/O 10 Series Microstar
A/O 4 Series Microstar
A/O 4 Series Phasestar
A/O 4 Series Apostar
A/O Cycloptic Stereo
Several old monocular scopes in more or less decrepit but usable condition
Re: XY Coordinate System on a slide
Too many 'projects'