Fluorescent capability?
Fluorescent capability?
Hi Everyone.
I have an opportunity to get a fluorescent illumination capable microscope in a good condition at a reasonable price. I am considering adding it to my collection because it is different but also to experiment with a new lighting technique.
I have seen a few images posted on this forum but it does not seem to be a very popular illumination technique, does anyone here have experience? Any suggestions as to the best areas to use fluorescence?
Any advice would be appreciated!
Thanks,
Rudi
I have an opportunity to get a fluorescent illumination capable microscope in a good condition at a reasonable price. I am considering adding it to my collection because it is different but also to experiment with a new lighting technique.
I have seen a few images posted on this forum but it does not seem to be a very popular illumination technique, does anyone here have experience? Any suggestions as to the best areas to use fluorescence?
Any advice would be appreciated!
Thanks,
Rudi
Re: Fluorescent capability?
Hi Rudi,
At one time I was interested it obtaining a fluorescent microscope.. After doing some extra research, I decided against it.. It seems the high pressure bulb for lighting is a very expensive(to me)replacement item.. It has a life span rated in hours, not days... Along with the cost of the staining materials, which are expensive also.. Here is a link to a DIY stand you could possibly fabricate yourself.. At least take not on the photo of the mounted LED's... They are clearly marked in the required nm of the respective light frequency that seems to be needed...
Best Regards,
BillT
At one time I was interested it obtaining a fluorescent microscope.. After doing some extra research, I decided against it.. It seems the high pressure bulb for lighting is a very expensive(to me)replacement item.. It has a life span rated in hours, not days... Along with the cost of the staining materials, which are expensive also.. Here is a link to a DIY stand you could possibly fabricate yourself.. At least take not on the photo of the mounted LED's... They are clearly marked in the required nm of the respective light frequency that seems to be needed...
Best Regards,
BillT
Re: Fluorescent capability?
chlorophyll, some crustaceans and some minerals can produce fluorescence.
I am not pursuing it because application is limited to me and cost is quite high, if you want the short exposure/low noise image at high magnification. At low magnification with long exposure, a powerful UV LED will work for cheap.
I am not pursuing it because application is limited to me and cost is quite high, if you want the short exposure/low noise image at high magnification. At low magnification with long exposure, a powerful UV LED will work for cheap.
Re: Fluorescent capability?
Hi BillT.billbillt wrote:Hi Rudi,
At one time I was interested it obtaining a fluorescent microscope.. After doing some extra research, I decided against it.. It seems the high pressure bulb for lighting is a very expensive(to me)replacement item.. It has a life span rated in hours, not days... Along with the cost of the staining materials, which are expensive also.. Here is a link to a DIY stand you could possibly fabricate yourself.. At least take not on the photo of the mounted LED's... They are clearly marked in the required nm of the respective light frequency that seems to be needed...
Best Regards,
BillT
Thanks for the information.
Yes, I think it will only be a low usage mode for me but having the capability is exciting (plus as a collector I need one to complete the range!). I did some research as I was worried about the mercury lamp. Life is quoted as 200 hours by Olympus and 300 hours by Osram, the danger seems to be that if you stretch it too long it might burst and then you have mercury fumes to deal with!
The cost of the lamp is not too bad, I can get them (Osram) at $100 or just below, compared to some of my other hobbies $100 for 200 hours is really cheap! But I agree, a conversion to LED might be a good option.
I have not really looked into staining materials, I am mostly interested in natural fluorescence but I will take it into account, thanks!
Appreciate your time,
Rudi
Last edited by RudiV on Sat Apr 15, 2017 5:46 am, edited 1 time in total.
Re: Fluorescent capability?
Hi zzffnn.zzffnn wrote:chlorophyll, some crustaceans and some minerals can produce fluorescence.
I am not pursuing it because application is limited to me and cost is quite high, if you want the short exposure/low noise image at high magnification. At low magnification with long exposure, a powerful UV LED will work for cheap.
Thanks for your comment! Yes, I can see that it won't be my most used scope, but it would be usable as a normal transmitted light scope as well.
I would be happy to maintain the mercury lighting setup but long exposures are fine as most of my subjects would not be moving and my camera equipment works really well with long exposure and high ISO setups. I often go up to ISO 64000 for commercial work with good results.
One of the first things I would need to do is get a spare lamp, I remember my disappointment clearly when I got my pristine CX-41 and after only 5 minutes the 150W halogen lamp blew. It was a long 2 weeks waiting for a replacement, I have now stocked up on all lamps I need to keep my scopes running!
Thanks for your time,
Rudi
Re: Fluorescent capability?
Rudi,
This threads shows you how well 1-2 $40 UV LED torches work at low magnification. Relatively long exposure (~30 second or more) is needed though.
Edit: here is the page: http://www.photomacrography.net/forum/v ... 23&start=0
That thread also contains a link Pau's LED epi illuminator. That is the more expensive, high power and high magnification way. No mercury bulb to change, but DIY is needed. You still need all parts of a UV epi illuminator rig, just replace mercury bulb with LED. Exposure time is lowered a few seconds. For more fun, add a green LED for high resolution green light photography.
This threads shows you how well 1-2 $40 UV LED torches work at low magnification. Relatively long exposure (~30 second or more) is needed though.
Edit: here is the page: http://www.photomacrography.net/forum/v ... 23&start=0
That thread also contains a link Pau's LED epi illuminator. That is the more expensive, high power and high magnification way. No mercury bulb to change, but DIY is needed. You still need all parts of a UV epi illuminator rig, just replace mercury bulb with LED. Exposure time is lowered a few seconds. For more fun, add a green LED for high resolution green light photography.
Last edited by zzffnn on Sat Apr 15, 2017 1:56 pm, edited 1 time in total.
Re: Fluorescent capability?
Hi Rudi,RudiV wrote:Hi Everyone.
I have an opportunity to get a fluorescent illumination capable microscope in a good condition at a reasonable price. I am considering adding it to my collection because it is different but also to experiment with a new lighting technique.
I have seen a few images posted on this forum but it does not seem to be a very popular illumination technique, does anyone here have experience? Any suggestions as to the best areas to use fluorescence?
Any advice would be appreciated!
Thanks,
Rudi
If money is no restraint, then go for it!...I would like to see some of your work from it..
BillT
Re: Fluorescent capability?
Sorry, I forgot to post that web page. Post edited.
Re: Fluorescent capability?
Thanks, interesting!zzffnn wrote:Rudi,
This threads shows you how well 1-2 $40 UV LED torches work at low magnification. Relatively long exposure (~30 second or more) is needed though.
Edit: here is the page: http://www.photomacrography.net/forum/v ... 23&start=0
That thread also contains a link Pau's LED epi illuminator. That is the more expensive, high power and high magnification way. No mercury bulb to change, but DIY is needed. You still need all parts of a UV epi illuminator rig, just replace mercury bulb with LED. Exposure time is lowered a few seconds. For more fun, add a green LED for high resolution green light photography.
I like Pau's solution and I love the DIY bit, any excuse to "fiddle" a bit!
I will be shopping for LED's, the green LED can also be interesting, lots to play with, thanks!
Rudi
Re: Fluorescent capability?
Hi BillT,billbillt wrote:Hi Rudi,RudiV wrote:Hi Everyone.
I have an opportunity to get a fluorescent illumination capable microscope in a good condition at a reasonable price. I am considering adding it to my collection because it is different but also to experiment with a new lighting technique.
I have seen a few images posted on this forum but it does not seem to be a very popular illumination technique, does anyone here have experience? Any suggestions as to the best areas to use fluorescence?
Any advice would be appreciated!
Thanks,
Rudi
If money is no restraint, then go for it!...I would like to see some of your work from it..
BillT
Hope to produce some images one of these days, it is just the shipping delays that are so frustrating....
Rudi
Re: Fluorescent capability?
Ok, deal made, soon there will be a new scope to play with, and new things to learn!
Now to find a good source of spare mercury lamps!
Rudi
Now to find a good source of spare mercury lamps!
Rudi
Re: Fluorescent capability?
I managed to get a good deal on 4 mercury lamps. Seems like there are 2 versions, a cheaper one (HBO 100 W/2) rated at 200 hours and a slightly more expensive one (HBO 103 W/2) that is rated for 300 hours life. According to the Olympus manual you can use either, at only a few $'s more I opted for the 300 hour version.
Should last me a while!
Now I wait again....
Rudi
Should last me a while!
Now I wait again....
Rudi
Re: Fluorescent capability?
Hi Rudi,RudiV wrote:Ok, deal made, soon there will be a new scope to play with, and new things to learn!
Now to find a good source of spare mercury lamps!
Rudi
OH YES!!... This is it!!.... I am excited with you!... Looking forward to seeing photos from it.. Also what stains you have to purchase and where...
BillT
Re: Fluorescent capability?
Hi BillT!billbillt wrote:
Hi Rudi,
OH YES!!... This is it!!.... I am excited with you!... Looking forward to seeing photos from it.. Also what stains you have to purchase and where...
BillT
Thanks, yes, excited as well, have spent quite a bit of time reading up on techniques and stains. I am now looking for suppliers, would be nice if I can place an order soon so that the stains get here about the same time as the scope. Lots "incoming" at the moment including 2 metallurgical scopes as well. Would need to extend my workplace soon.....
Thanks for the encouragement!
Rudi