Leitz Laborlux 12 darkfield filter
-
- Posts: 104
- Joined: Sun May 03, 2020 3:44 pm
Leitz Laborlux 12 darkfield filter
Has anyone used darkfield with this microscope? I can't figure out what kind of holder it's supposed to take. I'd assume the darkfield filter should be placed just below the condenser lens, but it's at the end of this long "tube" and there's no obvious place for filters or a holder.
- Attachments
-
- WhatsApp Image 2020-05-21 at 19.29.36.jpeg (67.83 KiB) Viewed 3007 times
Nikon Labophot
-
- Posts: 62
- Joined: Mon May 06, 2019 11:44 am
- Location: Perth, Western Australia
Re: Leitz Laborlux 12 darkfield filter
Does your condenser have a slot on the right side similar to this picture?
I have a headache, For which the future’s made
-
- Posts: 104
- Joined: Sun May 03, 2020 3:44 pm
Re: Leitz Laborlux 12 darkfield filter
It doesn't.PrecisionInstruments wrote: ↑Tue May 26, 2020 3:50 amDoes your condenser have a slot on the right side similar to this picture?
Nikon Labophot
-
- Posts: 62
- Joined: Mon May 06, 2019 11:44 am
- Location: Perth, Western Australia
Re: Leitz Laborlux 12 darkfield filter
I’m sorry, I have only just now noticed you have said it’s at the end of a long barrel, do you have a picture of it?
I have a headache, For which the future’s made
Re: Leitz Laborlux 12 darkfield filter
Hi folks
I’m too am interested in obtaining darkfield illumination from my Laborlux S (similar to the 12?) I have the LK condenser with no filter facility and getting a series 56 condenser soon (the same as the one shown by ‘Precisioninstruments’). It would be handy to know the filter size and also what size for Darkfield too if poss please?.
Thanks
Steve
I’m too am interested in obtaining darkfield illumination from my Laborlux S (similar to the 12?) I have the LK condenser with no filter facility and getting a series 56 condenser soon (the same as the one shown by ‘Precisioninstruments’). It would be handy to know the filter size and also what size for Darkfield too if poss please?.
Thanks
Steve