Hi,
I have a question about the Zeiss circular stage below: What does the little knob (circled in red) supposed to do?
It doesn't seem to do anything on mine, whether tighten or loosen, so I wonder if i would need to service my stage to get things working as they should...
BTW, the horizontal slide movement (1st big knob) on mine is very smooth compare to the vertical movement (2nd big knob), which is quite stiffer. Is this normal?
i thought the little knob in question would be for controlling the stiffness of this direction, but loosen it or even taking it completely out, did not seem to help..
Thanks!
Zeiss Circular Stage question
Re: Zeiss Circular Stage question
It corrects for Y axis 'wobble' There are 4 screws behind it that if removed would let you have a look.
See recent link: viewtopic.php?f=14&t=10177
.
It is always a little stiffer as it carries more weight.BTW, the horizontal slide movement (1st big knob) on mine is very smooth compare to the vertical movement (2nd big knob), which is quite stiffer. Is this normal?
See recent link: viewtopic.php?f=14&t=10177
.
- Attachments
-
- Rotary stage.jpg (64.43 KiB) Viewed 1605 times
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)
Olympus E-P2 (Micro Four Thirds Camera)
Re: Zeiss Circular Stage question
Thank you very much 75RR!
did not realize there's already a thread about this particular stage that I could learn everything about it there
did not realize there's already a thread about this particular stage that I could learn everything about it there