Can anyone please give me a guide to the Zeiss component-numbering system[s]
I bought an old circular stage today:
It rotates freely and has no angular graduations … but it has one linear axis, driven by rack & pinion
A simple device, which appears nicely made and is engraved Zeiss Germany 4340238
So why can’t I find any reference to it ?
MichaelG.
Asking the impossible …
Asking the impossible …
Too many 'projects'
Re: Asking the impossible …
This one maybe ? a photo from a Zeiss brochure.
It has two linear motions thpouhs, X and Y, in addition to rotation. In fact, mine is not marked with a catalogue numebr either... a you know there are often serial (?) numbers where we expect catalogue numbers.
It has two linear motions thpouhs, X and Y, in addition to rotation. In fact, mine is not marked with a catalogue numebr either... a you know there are often serial (?) numbers where we expect catalogue numbers.
Re: Asking the impossible …
.
Thanks … that may explain it
There are seven digits, not the typical six, and no spaces … so perhaps it is a serial number
MichaelG.
.
Too many 'projects'
- ImperatorRex
- Posts: 571
- Joined: Fri Mar 30, 2018 4:12 pm
- Location: Germany
- Contact:
Re: Asking the impossible …
Exactly, the seven digit numbers are series numbers, the 6 digits numbers are the order numbers. There was a time when Zeiss West (aka Carl Zeiss, Zeiss Winkel, Opton...not talking about Zeiss Jena) changes from series numbering to Order numbers.
Good source for information is provided in link below:
http://www.thilo-immel-optics.de/produkthistorie.htm
Good source for information is provided in link below:
http://www.thilo-immel-optics.de/produkthistorie.htm
Re: Asking the impossible …
Thank you, Jochen … That’s a very helpful link
MichaelG.
MichaelG.
Too many 'projects'