Leica DM IL

Everything relating to microscopy hardware: Objectives, eyepieces, lamps and more.
Post Reply
Message
Author
microb
Posts: 729
Joined: Wed Mar 27, 2019 6:39 am

Leica DM IL

#1 Post by microb » Thu Nov 14, 2019 7:09 am

So I wasn't expecting a Leica microscope light condenser setup to not have something to contain the other side of the iris blades. It turns out when you take off the lens, the four screws also presses the blades against the chassis to hold it all together.
Ooops.
It's hard to put one of these together.
Attachments
IMG_3077_1k.JPG
IMG_3077_1k.JPG (129.08 KiB) Viewed 1371 times

microb
Posts: 729
Joined: Wed Mar 27, 2019 6:39 am

Re: Leica DM IL

#2 Post by microb » Thu Nov 14, 2019 7:10 am

So here it is working again, waiting to be pressed back against the outside of the light fixed chassis so it stays together. Why do it that way?
Attachments
IMG_3079_1k.JPG
IMG_3079_1k.JPG (108.82 KiB) Viewed 1370 times

Post Reply