Closterium

Here you can post pictures and videos to show others.
Post Reply
Message
Author
TonyT
Posts: 184
Joined: Fri Sep 11, 2020 8:30 pm
Location: New Brunswick, CANADA

Closterium

#1 Post by TonyT » Wed Mar 17, 2021 2:41 pm

I was looking at some old images and found this from January 2011.
From a local lake and it reminded me that the best, only ?, place to find subjects in late Winter (everything at ground level covered in deep snow) is in water.
Will take a trip to the lake later today and see what I can find; will have to break through the ice!
Olympus BHS, 40x Splan Apo, Nikon D90.
Attachments
17iii21 closterium.jpg
17iii21 closterium.jpg (106.42 KiB) Viewed 1732 times
New Brunswick
Canada

User avatar
janvangastel
Posts: 533
Joined: Mon Dec 03, 2018 7:05 pm
Location: Huizen, Netherlands
Contact:

Re: Closterium

#2 Post by janvangastel » Wed Mar 17, 2021 4:24 pm

Nice photograph, sharp and detailed.

Seta
Posts: 131
Joined: Thu Feb 18, 2021 8:24 pm
Location: Castellón, Spain

Re: Closterium

#3 Post by Seta » Wed Mar 17, 2021 9:21 pm

Nice one, Diatoms are cool!!
The water samples I picked are full of them, but to small for my 40X via direct projection.
Tomorrow I will receive a CFN 100/0.25 Oil, I will put it to work.

TonyT
Posts: 184
Joined: Fri Sep 11, 2020 8:30 pm
Location: New Brunswick, CANADA

Re: Closterium

#4 Post by TonyT » Thu Mar 18, 2021 1:20 am

Thanks Jan and Seta.
The 100x should work fine. I should have mentioned that this image was actually at 125x (40 + 1.25 +2.5). This is probably an easier way to get this mag. than by using a 100x objective.
Seta: I'm the guy that ID'd your Bibionidae on PMG.
New Brunswick
Canada

Seta
Posts: 131
Joined: Thu Feb 18, 2021 8:24 pm
Location: Castellón, Spain

Re: Closterium

#5 Post by Seta » Thu Mar 18, 2021 9:36 am

Ahh OK ..difficult to identify who is who in different forums with different user names.. :D

When the time comes I will upgrade to a 40/1.30 fluor or 60/1.40 Apo instead of a 100x because of this, seems more versatile and resolving power should be the same

Post Reply