I came upon what I believe to be a juvenile water bear just now, and tried out my trial version of ZereneStacker on it. This water bear was a good deal smaller than the others I'd found, so I'm thinking it hatched from one of the eggs in my sample since I collected it.
And second water bear, stacked from 7 images. This one is much bigger than the first. An adult.
3rd water bear found on this slide:
And here's his head from 10 stacked images:
First attempt at stacking
-
- Posts: 274
- Joined: Sat Jan 27, 2018 6:00 pm
- Location: Cape Coma FL
Re: First attempt at stacking
Nice stacks! Zerene stacker is a great program and can do some pretty impressive things! Do you remember if you used PMAx or DMap for stacking? I find for the most part PMax gives the better results, it depends on what you are stacking but from my experience I stick to PMax!
Thanks for sharing! Keep it up!
Thanks for sharing! Keep it up!
Karl
AO21 with Canon M3
AO21 with Canon M3
-
- Posts: 274
- Joined: Sat Jan 27, 2018 6:00 pm
- Location: Cape Coma FL
Re: First attempt at stacking
Ah! I had wondered about the difference between Dmap and PMax, thank you for the tip!McConkey wrote:Nice stacks! Zerene stacker is a great program and can do some pretty impressive things! Do you remember if you used PMAx or DMap for stacking? I find for the most part PMax gives the better results, it depends on what you are stacking but from my experience I stick to PMax!
Thanks for sharing! Keep it up!
Re: First attempt at stacking
Good findings!
I've been trying to look for these myself.
I've been trying to look for these myself.