Page 1 of 1
First attempt at stacking
Posted: Fri Feb 23, 2018 4:00 pm
by Lilly Begonia
I came upon what I believe to be a juvenile water bear just now, and tried out my trial version of ZereneStacker on it. This water bear was a good deal smaller than the others I'd found, so I'm thinking it hatched from one of the eggs in my sample since I collected it.
And second water bear, stacked from 7 images. This one is much bigger than the first. An adult.
3rd water bear found on this slide:
And here's his head from 10 stacked images:
Re: First attempt at stacking
Posted: Sat Feb 24, 2018 11:57 pm
by McConkey
Nice stacks! Zerene stacker is a great program and can do some pretty impressive things! Do you remember if you used PMAx or DMap for stacking? I find for the most part PMax gives the better results, it depends on what you are stacking but from my experience I stick to PMax!
Thanks for sharing! Keep it up!
Re: First attempt at stacking
Posted: Sun Feb 25, 2018 12:05 am
by Lilly Begonia
McConkey wrote:Nice stacks! Zerene stacker is a great program and can do some pretty impressive things! Do you remember if you used PMAx or DMap for stacking? I find for the most part PMax gives the better results, it depends on what you are stacking but from my experience I stick to PMax!
Thanks for sharing! Keep it up!
Ah! I had wondered about the difference between Dmap and PMax, thank you for the tip!
Re: First attempt at stacking
Posted: Wed Mar 14, 2018 4:41 pm
by Jonnyvine
Good findings!
I've been trying to look for these myself.