Page 1 of 1
Ascorbic Acid POL
Posted: Wed Mar 13, 2019 10:34 pm
by Radazz
Ascorbic Acid in water, grown in vacuum chamber.
10x pol
Enjoy,
Radazz
Re: Ascorbic Acid POL
Posted: Wed Mar 13, 2019 10:38 pm
by jimur
nice job
Re: Ascorbic Acid POL
Posted: Wed Mar 13, 2019 11:24 pm
by billbillt
Great image...
BillT
Re: Ascorbic Acid POL
Posted: Thu Mar 14, 2019 1:57 am
by Radazz
Thank you gentlemen.
I wasn’t sure it would make a difference, but it seems to have impacted the evaporation pattern.
Radazz
Re: Ascorbic Acid POL
Posted: Thu Mar 14, 2019 10:26 pm
by jimur
Radazz wrote:Thank you gentlemen.
I wasn’t sure it would make a difference, but it seems to have impacted the evaporation pattern.
Radazz
I have considered a DIY vacuum chamber chamber for a few experiments. A couple of questions please.
Were you using a commercial vacuum chamber?
What was the vacuum measurement and did it vary?
I presume the vacuum was held until sample was completely dry.
Thanks,
jim
Re: Ascorbic Acid POL
Posted: Sun Mar 17, 2019 9:56 pm
by Radazz
Jim,
Commercial two quart vacuum chamber and pump by BAC
-30 Hg. Stayed steady
Dried completely in vacuum
Took much longer than I was expecting.
Radazz
Re: Ascorbic Acid POL
Posted: Mon Mar 18, 2019 12:59 am
by jimur
Thanks for the reply Radazz. I've wondered about the use and possible effect of vacuum in crystallography. Yes, it can take a fairly long time for the solutions or colloidal dispersions to dry even in normal atmosphere. I find the nicer crystals more often with slower growth but do use a slide warmer quite frequently with good results. I'm not always so patient an individual.