MicrobeHunter.com Microscopy Forum

You can also access this page with: www.microscopy-forum.com
It is currently Mon Aug 19, 2019 4:47 pm

All times are UTC

Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Wed Feb 27, 2019 4:47 pm 

Joined: Mon Jan 15, 2018 6:21 pm
Posts: 4
I bought a Zeiss standard 25 (the 160 not the ICS) last year with a trinoc head but I don't have the parts to put a c-mount camera in (and only have the manual for the ICS). To make it work properly do I only need a c-mount adapter and an s-pl eyepiece and would these pieces work?



or am I completely confused on how this would go together?

PostPosted: Thu Feb 28, 2019 6:15 am 
User avatar

Joined: Sun Oct 12, 2014 2:34 am
Posts: 5929
Location: Estepona
Hi phroxian,

I am afraid that I like others can't give you a definitive answer on this.

I have a Standard WL (23mm photo-tube diameter) with an afocal setup and when I was using direct projection I still had the camera on a tripod to avoid vibration.

Have you tried asking in the Equipment Discussions section of the www.photomacrography.net Forum? Worth a try.

Remember that one needs parfocality between the eyepieces and the photo-tube.

Here is an article that talks you through this with additional further links:


Zeiss Standard WL on sick leave, Standard 18 & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited