Rubber tongue that came loose from adapter
- ivangallego24
- Posts: 54
- Joined: Thu Nov 15, 2018 11:20 am
- Location: España
Rubber tongue that came loose from adapter
Me gustaría saber cómo puedo pegar esa goma,es decir que pegamento puedo usar o si hay alguna otra forma
- ivangallego24
- Posts: 54
- Joined: Thu Nov 15, 2018 11:20 am
- Location: España
Re: Rubber tongue that came loose from adapter
DeepL traslates that as:ivangallego24 wrote: ↑Mon Sep 09, 2019 8:35 pmMe gustaría saber cómo puedo pegar esa goma,es decir que pegamento puedo usar o si hay alguna otra forma
I would suggest using a strong 'double-sided tape'I would like to know how I can glue that glue, i.e. what glue I can use or if there is any other way
MichaelG.
Too many 'projects'
Re: Rubber tongue that came loose from adapter
Contact cement. Spread a thin layer on both surfaces and let dry for 10-15 minutes (depending on ambient temperature). Then press them together, preferrably if you can secure the bond with a vice or something similar. It should be good within a couple of hours.
- ivangallego24
- Posts: 54
- Joined: Thu Nov 15, 2018 11:20 am
- Location: España
Re: Rubber tongue that came loose from adapter
Loctite or superglue would be worth?
Re: Rubber tongue that came loose from adapter
Loctite is a brand name, and does not identify a specific product
https://www.loctiteproducts.com/en.html
MichaelG.
https://www.loctiteproducts.com/en.html
MichaelG.
Too many 'projects'
Re: Rubber tongue that came loose from adapter
Superglue (from Loctite or any other maker) is a cyanoacrylate glue. It is fast-curing and forms a strong bond, but is very stiff. For rubber surfaces, it is only a temporary solution. Contact cement is elastic, a sort of rubber itself, so it complies well with streching or distortion of the surface. My experience, anyway. And no such adhesion holds forever...
Re: Rubber tongue that came loose from adapter
Good point on the contact glue Hobbyst46
Perhaps the OP ( ivangallego24 ) would care to review the Phone adapter.
Original Amazon reviews suggested it was better suited to a monocular, be interesting to hear how it works on a binocular head.
Perhaps the OP ( ivangallego24 ) would care to review the Phone adapter.
Original Amazon reviews suggested it was better suited to a monocular, be interesting to hear how it works on a binocular head.
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)
Olympus E-P2 (Micro Four Thirds Camera)
- ivangallego24
- Posts: 54
- Joined: Thu Nov 15, 2018 11:20 am
- Location: España
Re: Rubber tongue that came loose from adapter
Well in the end I used superglue brand loctite super glue cola-3 to have how much it holds, I think the superglue is extra strong