LED Light kit

Here you can discuss all microscopy-related accessories and equipment (microtomes, filters...)
Post Reply
Message
Author
p3aul
Posts: 79
Joined: Fri Jan 08, 2016 3:16 am
Location: Macon, GA USA

LED Light kit

#1 Post by p3aul » Mon Feb 22, 2016 2:21 am

Hi!
I just wanted to post a pic of my latest purchase, an LED light kit! I got it at the dollar store. Installation is simple. Take it out of the sack and turn it on and place it under the built-in illuminator!

Seriously though, I did give me a chance to see that it was better than the 30W halogen lighting that came with the scope. With three LEDs the illumination is even across the field of view and my specimens are clearer and sharper. Now all I have to do is add a way to adjust the intensity and I'm all set! Radio Shack just had to close when I needed it the most! :cry:
Attachments
LED.jpg
LED.jpg (52.35 KiB) Viewed 5208 times
Paul Microscope: Amscope T400b Camera: Amscope MU300
Telescope: Orion xt6 classic Dob, Zhumell z10 classic Dob

charlie g
Posts: 1848
Joined: Mon Oct 20, 2014 7:54 pm

Re: LED Light kit

#2 Post by charlie g » Mon Feb 22, 2016 8:05 pm

For a microscope while on holiday by St.Lawrence River/US-Canada borderlands...that's exactly what I use. Mine you can click it to either all LED's on...or perhaps only one on. And folded paper toweling is your intensity control...one ply, vrs. numerous ply of toweling. Charlie guevara

p3aul
Posts: 79
Joined: Fri Jan 08, 2016 3:16 am
Location: Macon, GA USA

Re: LED Light kit

#3 Post by p3aul » Mon Feb 22, 2016 11:11 pm

hey Great idea Charlie! I think the quality of the light source might be better, if i can find one. I think a microscope with a built-in LED might be in my future. What do you think of this one? It has Phase contrast with all the annular condensers built in, Infinity Plan also.

http://www.amazon.com/AmScope-T610-IPL- ... Microscope
Paul Microscope: Amscope T400b Camera: Amscope MU300
Telescope: Orion xt6 classic Dob, Zhumell z10 classic Dob

charlie g
Posts: 1848
Joined: Mon Oct 20, 2014 7:54 pm

Re: LED Light kit

#4 Post by charlie g » Tue Feb 23, 2016 12:27 am

I looked at the link..it does not give specifics on each lens unit (the oculars, the objectives)...I encourage you to post a request in a forum thread.

Ideally, some folks will coment to you in this thread. I agree a trinocular head, brightfield and phase contrast are terrific starts for microscopy. I hope folks coment for you in this thread. charlie guevara

billbillt
Posts: 2895
Joined: Mon Nov 10, 2014 10:01 pm

Re: LED Light kit

#5 Post by billbillt » Tue Feb 23, 2016 6:42 pm

I use one of these:

http://www.ebay.com/itm/3W-5W-LED-Ceili ... lgo=origal

It is insanely bright.. You cannot look directly into it... I just prefer the warm white color... I looks like natural sun light to me...

BillT

boffin
Posts: 8
Joined: Mon Feb 08, 2016 5:38 am

Re: LED Light kit

#6 Post by boffin » Sun Mar 06, 2016 1:54 pm

Bill, that's a great idea! What do you use to control the intensity? Is there another piece of kit we can connect to?
billbillt wrote:I use one of these:

http://www.ebay.com/itm/3W-5W-LED-Ceili ... lgo=origal

It is insanely bright.. You cannot look directly into it... I just prefer the warm white color... I looks like natural sun light to me...

BillT

billbillt
Posts: 2895
Joined: Mon Nov 10, 2014 10:01 pm

Re: LED Light kit

#7 Post by billbillt » Sun Mar 06, 2016 3:45 pm

Hi Boffin,

I used a PWM controller from Ebay such as this one..

http://www.ebay.com/itm/12V-36V-Pulse-W ... 1336152683

The large flange on the light fixture comes off easy...
Attachments
100_1547.JPG
100_1547.JPG (59.29 KiB) Viewed 5115 times

Post Reply