out of stock and took to long
- MicroInspector
- Posts: 365
- Joined: Tue May 03, 2016 7:01 am
out of stock and took to long
Sad to say the item I ordered
The smartphone adopter was out of stock
And now they canceled my order.
It really Pisses me off.
Now I.have to the item some where and order next month.
this really pissed me off
The smartphone adopter was out of stock
And now they canceled my order.
It really Pisses me off.
Now I.have to the item some where and order next month.
this really pissed me off
The microscope reveals the truth of life.
Omax M82EZ microscope
Omax M82EZ microscope
Re: out of stock and took to long
My advice is to maybe find one on Ebay and a USA seller... Ebay makes them be responsible sellers..
- MicroInspector
- Posts: 365
- Joined: Tue May 03, 2016 7:01 am
Re: out of stock and took to long
But ebay is auction website and always gives to the highest bidder.
I one guy won for the highest for a case of prepared slides of infectious bacterias
I sm.a victim of supply and demand
I one guy won for the highest for a case of prepared slides of infectious bacterias
I sm.a victim of supply and demand
The microscope reveals the truth of life.
Omax M82EZ microscope
Omax M82EZ microscope
-
- Posts: 155
- Joined: Sun Mar 06, 2016 5:54 pm
- Location: Pinehurst, Texas
Re: out of stock and took to long
MicroInspector wrote:But ebay is auction website and always gives to the highest bidder.
I one guy won for the highest for a case of prepared slides of infectious bacterias
I sm.a victim of supply and demand
Not all items for sale on Ebay are auctions - a great many are Buy It Now. Some are even Best Offer.
Jim
Re: out of stock and took to long
Sorry to hear of the delay.
There is a DIY option that can work very well. Here is a picture
It is a simple tube that slides down over your eyepiece and eyepiece tube. It provides a steady rest for you to hold your phone against. It completely takes care of maintaining the proper spacing from the eyepiece, all you have to do is center the lens over the eyepiece.
I made mine out of foam and duct tape. You could use anything that you can form into a tube. Cardboard would work fine.
THIS IS THE KEY TO MAKING THIS WORK
The tube must "seat" in the same place everytime AND you must experiment and find the exact length to cut it to that provides a sharp and clear edge of field of your eyepiece in your photos
Make the tube long, try it. If you do not a sharp edge in the field, and the image is small, it means the tube is too long. Trim it a bit, and try again.
Eventually you will get it the right length and taking a photo will be as simple as putting the tube on the scope, holding phone against the tube, center the lens over the tube, focus and shoot.
You should be able to find the materials very inexpensively, if not free, and you can make and use it today.
There is a DIY option that can work very well. Here is a picture
It is a simple tube that slides down over your eyepiece and eyepiece tube. It provides a steady rest for you to hold your phone against. It completely takes care of maintaining the proper spacing from the eyepiece, all you have to do is center the lens over the eyepiece.
I made mine out of foam and duct tape. You could use anything that you can form into a tube. Cardboard would work fine.
THIS IS THE KEY TO MAKING THIS WORK
The tube must "seat" in the same place everytime AND you must experiment and find the exact length to cut it to that provides a sharp and clear edge of field of your eyepiece in your photos
Make the tube long, try it. If you do not a sharp edge in the field, and the image is small, it means the tube is too long. Trim it a bit, and try again.
Eventually you will get it the right length and taking a photo will be as simple as putting the tube on the scope, holding phone against the tube, center the lens over the tube, focus and shoot.
You should be able to find the materials very inexpensively, if not free, and you can make and use it today.
- MicroInspector
- Posts: 365
- Joined: Tue May 03, 2016 7:01 am
Re: out of stock and took to long
I give it a try
The microscope reveals the truth of life.
Omax M82EZ microscope
Omax M82EZ microscope
-
- Posts: 155
- Joined: Sun Mar 06, 2016 5:54 pm
- Location: Pinehurst, Texas
Re: out of stock and took to long
That's a very clever DIY adapter! Why didn't I think of that? Looks as though something similar could be made for a point and shoot camera as well.
Jim
Jim
- MicroInspector
- Posts: 365
- Joined: Tue May 03, 2016 7:01 am
Re: out of stock and took to long
Well I got the car board roll tube a paper towers
And slit tapes it to fit snug over the eye piece. Have to trim to the right distace.
And slit tapes it to fit snug over the eye piece. Have to trim to the right distace.
The microscope reveals the truth of life.
Omax M82EZ microscope
Omax M82EZ microscope
- MicroInspector
- Posts: 365
- Joined: Tue May 03, 2016 7:01 am
Re: out of stock and took to long
The microscope reveals the truth of life.
Omax M82EZ microscope
Omax M82EZ microscope
- MicroInspector
- Posts: 365
- Joined: Tue May 03, 2016 7:01 am
Re: out of stock and took to long
Good news
After a discussion with Amazon
About the out stock carson universal
Smartphone adopter they made up
By shipping me a slight used one in good condition
for $ 35.00 and they waived the shipping cost.
Mean time I use my home made camera thing.
should be getting some time next week.
After a discussion with Amazon
About the out stock carson universal
Smartphone adopter they made up
By shipping me a slight used one in good condition
for $ 35.00 and they waived the shipping cost.
Mean time I use my home made camera thing.
should be getting some time next week.
The microscope reveals the truth of life.
Omax M82EZ microscope
Omax M82EZ microscope