I bought a Zeiss standard 25 (the 160 not the ICS) last year with a trinoc head but I don't have the parts to put a c-mount camera in (and only have the manual for the ICS). To make it work properly do I only need a c-mount adapter and an s-pl eyepiece and would these pieces work?
https://www.ebay.com/itm/Zeiss-S-PL-12- ... %7Ciid%3A1
https://www.ebay.com/itm/Zeiss-1-x-C-Mo ... :rk:7:pf:0
or am I completely confused on how this would go together?
Setting up a trinoc head, Zeiss standard
Re: Setting up a trinoc head, Zeiss standard
Hi phroxian,
I am afraid that I like others can't give you a definitive answer on this.
I have a Standard WL (23mm photo-tube diameter) with an afocal setup and when I was using direct projection I still had the camera on a tripod to avoid vibration.
Have you tried asking in the Equipment Discussions section of the www.photomacrography.net Forum? Worth a try.
Remember that one needs parfocality between the eyepieces and the photo-tube.
Here is an article that talks you through this with additional further links:
http://www.krebsmicro.com/pdf/trinoc_a3.pdf
I am afraid that I like others can't give you a definitive answer on this.
I have a Standard WL (23mm photo-tube diameter) with an afocal setup and when I was using direct projection I still had the camera on a tripod to avoid vibration.
Have you tried asking in the Equipment Discussions section of the www.photomacrography.net Forum? Worth a try.
Remember that one needs parfocality between the eyepieces and the photo-tube.
Here is an article that talks you through this with additional further links:
http://www.krebsmicro.com/pdf/trinoc_a3.pdf
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)
Olympus E-P2 (Micro Four Thirds Camera)