BH2 UMA to MTV3 Adapter
BH2 UMA to MTV3 Adapter
Doing a tube lens set up for a BHM microscope. So using the tube lens un the UMA epi, and instead of a triocular setup, the following modeled tube hooks up to a MTV-3 adapter that has a lens to aim light for the C-mount camera.
- Attachments
-
- fusion360_1k.PNG (185.84 KiB) Viewed 5528 times
Re: BH2 UMA to MTV3 Adapter
Here is the 3D print with and without the relay lens, along side the triocular head it matches:
- Attachments
-
- IMG_2781_1k.JPG (46.95 KiB) Viewed 5450 times
-
- IMG_2780_1k.JPG (83.59 KiB) Viewed 5450 times
Last edited by microb on Mon May 27, 2019 5:40 am, edited 1 time in total.
-
- Posts: 2794
- Joined: Sat Mar 03, 2018 9:09 pm
Re: BH2 UMA to MTV3 Adapter
That is awesome!
- Crater Eddie
- Posts: 1858
- Joined: Wed Nov 12, 2014 4:39 pm
- Location: Illinois USA
Re: BH2 UMA to MTV3 Adapter
Way cool! How long did it take to print? We 3D print some prototyping parts at work, takes a while some times, but very well worth the effort.
CE
CE
Olympus BH-2 / BHTU
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
LOMO BIOLAM L-2-2
LOMO POLAM L-213 / BIOLAM L-211 hybrid
LOMO Multiscope (Biolam)
Cameras: Canon T3i, Olympus E-P1 MFT, Amscope 3mp USB
Re: BH2 UMA to MTV3 Adapter
This is a PLA print of 7 hours.
Re: BH2 UMA to MTV3 Adapter
Nice work microb. Very well done.
Tom
Tom
- SunshineLW
- Posts: 107
- Joined: Sat Mar 03, 2018 5:30 pm
- Location: College Station, TX
- Contact:
Re: BH2 UMA to MTV3 Adapter
Totally badass! Going hard with that 3d printer!