Zeiss STD 18/W/L Nosepiece turret options

What equipment do you use? Post pictures and descriptions of your microscope(s) here!
Post Reply
Message
Author
rs6000
Posts: 92
Joined: Fri Jul 13, 2018 4:14 pm

Zeiss STD 18/W/L Nosepiece turret options

#1 Post by rs6000 » Wed Aug 28, 2019 5:14 pm

hello there microbe crowd I am curious to what are my options for the dovetail slide on my std-18 nosepiece
I would liken to go with mix of BrightF and Phase in one turret and 5 doesn't cut it anymore

I have observed some wild differing types some that have 6 slots and and even one that HAD :shock: 7

User avatar
75RR
Posts: 8207
Joined: Sun Oct 12, 2014 2:34 am
Location: Estepona, Spain

Re: Zeiss STD 18/W/L Nosepiece turret options

#2 Post by 75RR » Wed Aug 28, 2019 5:53 pm

There are 3 variations of removable Zeiss Standard nosepieces: a 4 objective nosepiece (these are black and were made for the GFL I believe), a 5 objective nosepiece and a 7 objective nosepiece.*

* Be aware that there are other microscopes by Zeiss that also have removable nosepieces - these will not fit on the Standard.

You need to check that the part that slides into the arm is identical to the one you are using now.

The 7 objective nosepiece is fairly rare, so I suggest that you have one 5 place nosepiece setup for Brightfield and one setup for Phase.

Since they are quick and easy to remove and install it is a practical solution. Most people with removable nosepieces adopt this method - it is what they were designed for after all.
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)

MicroBob
Posts: 3154
Joined: Sun Dec 25, 2016 9:11 am
Location: Northern Germany

Re: Zeiss STD 18/W/L Nosepiece turret options

#3 Post by MicroBob » Wed Aug 28, 2019 7:50 pm

These Zeiss Standard 18 nosepieces are quite expensive, and strt to get impressively expensive whey they have more than 5 seats. The ones for Phomi and Universal are cheaper in comparison. So you might go a completely different route and buy a second microscope and have them set up for their specific purposes.

Bob

User avatar
75RR
Posts: 8207
Joined: Sun Oct 12, 2014 2:34 am
Location: Estepona, Spain

Re: Zeiss STD 18/W/L Nosepiece turret options

#4 Post by 75RR » Wed Aug 28, 2019 10:14 pm

It is a fact that on ebay, there are many sellers that overprice their products.

This is particularly true if a brand name is involved.

However, a little patience can still yield good results:

https://www.ebay.co.uk/sch/i.html?_from ... Complete=1

I do not think that the price of a Standard Nosepiece has reached that of a complete Standard Microscope yet!
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)

rs6000
Posts: 92
Joined: Fri Jul 13, 2018 4:14 pm

Re: Zeiss STD 18/W/L Nosepiece turret options

#5 Post by rs6000 » Sat Aug 31, 2019 1:03 am

THank you All for the replies I do currently have a 5 place but have noticed most if not all of the 6+ offerings esp the 7-pos I saw seem to be only for the universal boat anchor size scope
and I dont own one of those just a petite 18 series I tried once to coddle together a larger nosepiece for my 18 from a zeiss inverted scope 6-pos turret rather economical 45$ so i gave it a try and tore apart my the 4 pos turret I had taken apart and even though I had the back focal set correct the BCD or Objective circle diameter was greater then to smaller 5 and 4 port turrets it had cropped off the outer part of the image
Attachments
zeiss6.jpg
zeiss6.jpg (37.59 KiB) Viewed 8445 times

User avatar
75RR
Posts: 8207
Joined: Sun Oct 12, 2014 2:34 am
Location: Estepona, Spain

Re: Zeiss STD 18/W/L Nosepiece turret options

#6 Post by 75RR » Sat Aug 31, 2019 4:36 am

It would appear that there is also a white 4 place objective nosepiece, as well the single place nosepiece of course.

viewtopic.php?f=15&t=5991
Attachments
Zeiss Standard Nosepieces.jpg
Zeiss Standard Nosepieces.jpg (76.37 KiB) Viewed 8434 times
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)

rs6000
Posts: 92
Joined: Fri Jul 13, 2018 4:14 pm

Re: Zeiss STD 18/W/L Nosepiece turret options

#7 Post by rs6000 » Mon Sep 02, 2019 2:51 am

75RR wrote:
Sat Aug 31, 2019 4:36 am
It would appear that there is also a white 4 place objective nosepiece, as well the single place nosepiece of course.

viewtopic.php?f=15&t=5991
WOW did not know there was 7pos Available for the Standard models I have seen one intended for the Z universal but never for the std18

User avatar
75RR
Posts: 8207
Joined: Sun Oct 12, 2014 2:34 am
Location: Estepona, Spain

Re: Zeiss STD 18/W/L Nosepiece turret options

#8 Post by 75RR » Mon Sep 02, 2019 9:10 am

rs6000 wrote:

"WOW did not know there was 7pos Available for the Standard models I have seen one intended for the Z universal but never for the std18"

They fit on both the Standard 18 and the WL.

Unfortunately they tend to go for silly money, so unless you are willing to combine several years worth of xmas and birthday presents, you are better off with two 5 place nosepieces. ;)
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)

User avatar
ImperatorRex
Posts: 571
Joined: Fri Mar 30, 2018 4:12 pm
Location: Germany
Contact:

Re: Zeiss STD 18/W/L Nosepiece turret options

#9 Post by ImperatorRex » Mon Sep 02, 2019 1:24 pm

One handicap of the 7 place nosepiece is also that it is to packed and therefore the DIC stools cannot be installed on such a nosepiece.

User avatar
75RR
Posts: 8207
Joined: Sun Oct 12, 2014 2:34 am
Location: Estepona, Spain

Re: Zeiss STD 18/W/L Nosepiece turret options

#10 Post by 75RR » Mon Sep 02, 2019 2:22 pm

ImperatorRex wrote:
Mon Sep 02, 2019 1:24 pm
"One handicap of the 7 place nosepiece is also that it is to packed and therefore the DIC stools cannot be installed on such a nosepiece."


Do you mean that the opening are too close together to allow the DIC slide holders to fit?
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)

User avatar
ImperatorRex
Posts: 571
Joined: Fri Mar 30, 2018 4:12 pm
Location: Germany
Contact:

Re: Zeiss STD 18/W/L Nosepiece turret options

#11 Post by ImperatorRex » Mon Sep 02, 2019 3:19 pm

Hi 75RR,
I personally never tried this on a 7 nosepiece, so I cannot provide the details where exactely the collision occures (I just remember such a comment from a past forum thread). Looking at a 5x nosepiece with DIC stools I could imagine that space may become an issue if distance between holes are just 1-2 mm less.

rs6000
Posts: 92
Joined: Fri Jul 13, 2018 4:14 pm

Re: Zeiss STD 18/W/L Nosepiece turret options

#12 Post by rs6000 » Fri Sep 06, 2019 5:10 pm

Have you actually seen a standard/18 type of turret exceeding 5 Pos, I only knew of their existence recently from that old catalog that was posted but prior to that time I have only known of a 5 pos as being the highest position available for this series of microscopes.
They cleary had a catalog # but in the 6-7 years of looking around I have never laid my eyes on such a item maybe none were produced must have been very pricey item back in those days.

User avatar
75RR
Posts: 8207
Joined: Sun Oct 12, 2014 2:34 am
Location: Estepona, Spain

Re: Zeiss STD 18/W/L Nosepiece turret options

#13 Post by 75RR » Fri Sep 06, 2019 6:19 pm

rs6000 wrote:
Fri Sep 06, 2019 5:10 pm
Have you actually seen a standard/18 type of turret exceeding 5 Pos, I only knew of their existence recently from that old catalog that was posted but prior to that time I have only known of a 5 pos as being the highest position available for this series of microscopes.
They cleary had a catalog # but in the 6-7 years of looking around I have never laid my eyes on such a item maybe none were produced must have been very pricey item back in those days.

I have seen them for sale a couple of times on ebay.

Here is an advertisement with a picture as proof that it exists ;) it is #4
Attachments
Zeiss-ad.jpg
Zeiss-ad.jpg (151.23 KiB) Viewed 8248 times
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)

MicroBob
Posts: 3154
Joined: Sun Dec 25, 2016 9:11 am
Location: Northern Germany

Re: Zeiss STD 18/W/L Nosepiece turret options

#14 Post by MicroBob » Fri Sep 06, 2019 7:20 pm

What I find especially interesting in the ad you posted: There are no less than 3 different bino heads on this picture!

- The flat design, known since the GFL, tube factor 1
- The newer model, Siedentopf design (which was used at Zeiss since the 1920s, I think tube factor 1,25)
- The model with the ball like connection to the base, here on the fluorescence microscope (with less inclined eyepieces, I think tube factor 1,25)

Does somebody know the reason for these different bino heads?


Bob

rs6000
Posts: 92
Joined: Fri Jul 13, 2018 4:14 pm

Re: Zeiss STD 18/W/L Nosepiece turret options

#15 Post by rs6000 » Sat Sep 07, 2019 3:14 am

Well A high thank for all the responses and the vintage zeiss ad , I certainly thought after searching for 5-pos nosepieces and never seeing anything above the 4,5 for at least 5 years off and on that they existed only for the universal which however I do see from time to time but mind you, there Quite pricey +500USD

rs6000
Posts: 92
Joined: Fri Jul 13, 2018 4:14 pm

Re: Zeiss STD 18/W/L Nosepiece turret options

#16 Post by rs6000 » Sat Sep 07, 2019 3:22 am

75RR wrote:
Fri Sep 06, 2019 6:19 pm
rs6000 wrote:
Fri Sep 06, 2019 5:10 pm
Have you actually seen a standard/18 type of turret exceeding 5 Pos, I only knew of their existence recently from that old catalog that was posted but prior to that time I have only known of a 5 pos as being the highest position available for this series of microscopes.
They cleary had a catalog # but in the 6-7 years of looking around I have never laid my eyes on such a item maybe none were produced must have been very pricey item back in those days.

I have seen them for sale a couple of times on ebay.

Here is an advertisement with a picture as proof that it exists ;) it is #4
Mr 75RR you are a wealth of Zeiss information and great asset to the community

Chapeau bas

User avatar
75RR
Posts: 8207
Joined: Sun Oct 12, 2014 2:34 am
Location: Estepona, Spain

Re: Zeiss STD 18/W/L Nosepiece turret options

#17 Post by 75RR » Sat Sep 07, 2019 5:00 am

... Quite pricey +500USD
The 7 place nosepieces for the 18 and the WL that I saw sold on ebay went for around half that figure - still a lot of money of course - that is why I do not have one :)
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)

Post Reply