Leitz binocular head teardown

Everything relating to microscopy hardware: Objectives, eyepieces, lamps and more.
Post Reply
Message
Author
Aslan
Posts: 47
Joined: Wed Oct 24, 2018 3:01 pm
Location: Toronto

Leitz binocular head teardown

#1 Post by Aslan » Fri Oct 11, 2019 11:47 am

Hello all. Does anyone know of a repair or teardown manual for a Leitz binocular head. The head is from an Ortholux 1 but I think the SM had similar construction. The head that came with my ortholux needs some serious internal cleaning (as in separating prisms to get to dirt and mould cleaning). Luckily I already had a trinocular head that is fine on the scope but I would like to see if I can clean the binocular head. Or should I just cut my losses or sell it as-is on ebay?
____________________________
Leitz Ortholux I
Leitz SM microscope
Reichert Biovert
Spenser 58 convertible microscope

MicroBob
Posts: 2194
Joined: Sun Dec 25, 2016 9:11 am
Location: Northern Germany

Re: Leitz binocular head teardown

#2 Post by MicroBob » Fri Oct 11, 2019 12:52 pm

Hi Aslan,
there a basically two types of fungus damage: Superficial hazing and surface with etched net like looking shape. The former can be removed in most cases, the latter usually not.
Can you post pictures ob your binocular head?
I have cleaned a couple of them, but only as far as it was possible without taking the prisms out, which usually was enough.

Bob

Aslan
Posts: 47
Joined: Wed Oct 24, 2018 3:01 pm
Location: Toronto

Re: Leitz binocular head teardown

#3 Post by Aslan » Fri Oct 11, 2019 3:20 pm

81D80E2D-6677-4F98-82BA-53D1282A1C52.jpeg
81D80E2D-6677-4F98-82BA-53D1282A1C52.jpeg (85.88 KiB) Viewed 2388 times
I thought it was on the surface. But it is deeper.
____________________________
Leitz Ortholux I
Leitz SM microscope
Reichert Biovert
Spenser 58 convertible microscope

mnmyco
Posts: 142
Joined: Tue Aug 28, 2018 11:03 pm

Re: Leitz binocular head teardown

#4 Post by mnmyco » Fri Oct 11, 2019 8:58 pm

That looks like fungal damage that is not possible to repair.

Scarodactyl
Posts: 963
Joined: Sat Mar 03, 2018 9:09 pm

Re: Leitz binocular head teardown

#5 Post by Scarodactyl » Sat Oct 12, 2019 12:01 am

It does, but every now and then they'll surprise you and disappear with the first wipe. It's worth a try, because if it doesn't work oh well, it was a loss anyway, if it does it's the best feeling, like when a screw remover finally works on a stripped bolt.

Aslan
Posts: 47
Joined: Wed Oct 24, 2018 3:01 pm
Location: Toronto

Re: Leitz binocular head teardown

#6 Post by Aslan » Sat Oct 12, 2019 12:35 am

So what I’m hearing is that I might as well have a bash. At the very least I will Get a deeper appreciation for the people that put these things together.
____________________________
Leitz Ortholux I
Leitz SM microscope
Reichert Biovert
Spenser 58 convertible microscope

MicroBob
Posts: 2194
Joined: Sun Dec 25, 2016 9:11 am
Location: Northern Germany

Re: Leitz binocular head teardown

#7 Post by MicroBob » Sat Oct 12, 2019 2:39 am

Defects in the light path can lead to two things:
- You get a fat spot in the image :evil:
- There is a very slight reduction of contrast :D

The hardest test is with a 100:1 oil immersion objective. Dirt and damages show more than with weaker objectives.

Sabatini
Posts: 265
Joined: Tue Nov 12, 2019 3:09 am

Re: Leitz binocular head teardown

#8 Post by Sabatini » Wed Dec 11, 2019 5:08 am

Hello, a greeting all, recently completely disassembled mine, and the truth is a very delicate procedure and much patience and softness in the treatment, but you get to eliminate the fungus and make it look very good .another thing is then aligning the prisms and so on to make everything look good, that's another thing, it is also achieved with patience and if you are not very demanding and perfectionist, the results are very encouraging, mine was completely full of mold and is now very nice and clean as much as possible, and the image improved to a great extent, I would say that they were improved greatly and now give some luminous images and very clear and sharp. I'm very happy as they were. I hope you can clean yours too.
Screenshot_2019-12-10-22-49-46-375_com.whatsapp.jpg
Screenshot_2019-12-10-22-49-46-375_com.whatsapp.jpg (53.72 KiB) Viewed 1549 times
IMG_20190913_092218.jpg
IMG_20190913_092218.jpg (70.34 KiB) Viewed 1549 times
IMG_20190615_201010283.jpg
IMG_20190615_201010283.jpg (106.14 KiB) Viewed 1549 times

MichaelG.
Posts: 2383
Joined: Mon Apr 10, 2017 8:24 am
Location: NorthWest England

Re: Leitz binocular head teardown

#9 Post by MichaelG. » Wed Dec 11, 2019 8:23 am

Congratulations on your success, and thanks for the reference photos.

MichaelG.
Too many 'projects'

Bryan
Posts: 85
Joined: Mon Sep 17, 2018 11:31 pm

Re: Leitz binocular head teardown

#10 Post by Bryan » Thu Dec 12, 2019 5:17 am

A half and half mixture of hydrogen peroxide and ammonia will dissolve lens mold. Do this in a well ventilated area. If the mold etched the glass you will still have the etch but sometimes you luck out ant it all goes away. If it’s between cemented elements then you’re out of luck.

Post Reply