Rot 1 plate adapter for Zeiss

Here you can discuss DIY adaptations to the microscope.
Post Reply
Posts: 212
Joined: Sun Jul 23, 2017 6:11 pm
Location: Dallas TX

Rot 1 plate adapter for Zeiss

#1 Post by wstenberg » Sun Oct 27, 2019 11:33 pm

I have two sizes of sliders for the Zeiss microscopes. The smaller ones fit in the Standard and the larger fit in the Universal.
I was home today with a cold, so I decided to make an adapter.
Took way too much time- still needs a pin on the bottom so it doesn't go in too far, but not tonight...
IMG_0914.JPG (89.76 KiB) Viewed 3110 times
IMG_0912.JPG (132.71 KiB) Viewed 3110 times
IMG_0909.JPG (136.31 KiB) Viewed 3110 times
Dallas, Texas

Zeiss Standard WL with POL
Zeiss Axiomat
Zeiss Universal
Zeiss Stereomikroskop

User avatar
Posts: 6512
Joined: Sun Oct 12, 2014 2:34 am
Location: Estepona

Re: Rot 1 plate adapter for Zeiss

#2 Post by 75RR » Mon Oct 28, 2019 4:33 am

Neat idea! Press fit?

Also, good on you for not 'soldiering on' and giving everyone at work a cold.
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)

Post Reply