A few additions to my Wild 20 to make it more complete. I was able to get another Wild 20 parts stand for some pieces I needed. A photo tube, a Pol rotating analyzer which slides into the Epi section, some additional objectives, 2X and 4X as well as additonal 10X and 20X with turret, a condenser thumbscrew and the large screw which goes in front of the light port. There is a multi-filter assembly which goes over the light port and screws in the stand, which I don't have...yet, so the screw is there to cover the hole. I still need to find a lower polarizer, another bulb assembly (so I can have both Epi and transmitted without having to switch out) and some Fluotar phase objectives would be nice...and the 6 objective turret would be real nice too. It is so nice to be able to rebuild a classic microscope into it's former glory!
Some of the additional Wild parts:

- The additional Wild parts
- Wild Heerbrugg M20 Epi Phototube Analyzer Turrets.jpg (58.28 KiB) Viewed 3180 times
And the additional parts on the Wild 20:

- Additional parts on the Wild
- Wild Heerbrugg M20 Epi with Phototube Analyzer.jpg (56.61 KiB) Viewed 3180 times