... Hopefully, it’s not too late already
I have scanned, OCR’d and translated (using DeepL) page 7 of the above
Clearly this will need some correction, but here is that first effort:
MichaelG.A Supporting surface of the attachment Tube 190mm
ditto
160mm
c Object level
In order to increase the contrast of the
Objects serve replaceable light filters 10, which
in the lighting system after collector 2 on
are sorted
When working in the dark field, the beams
the darkfield plate <T> is inserted, the
consists of the orifice 11 and the mirror 12, and
the field diaphragm 6 is opened completely
In this case, the rays of the light source
due to its wide bundle also on the outside of the lens 3
Afterwards the central area of the beam
lenbundle through orifice 11, but
the outer area of the bundle to the ring mirror 12
which has been inserted instead of reflector 4
is to continue on the mirror condenser
of the epiobjek
tivs 5 and then thrown onto the object
The apertures of the objective and mirror cores
densors are calculated in such a way that the objective
only those rays can reach which are
and through which now a bright image of the
Structure of the object reflected or scattered
object on dark background of the microscope field
is achieved
The: illumination of the object in transmitted light is
with the lighting system
(22oV15w)
The light source 13 provides the light for the
and the frosted glass 16 for a uniform eye 2)
tors 14(Lens of the lighting device Ou-3
illumination of the microscope field
The main parts of the microscope (components) are
the microme ter mechanism in body 17(Fig. 2)
the base 18(Fig. 2), the lighting device
19, the body 20, the head 21 with revolver, the
object table 22 on the support arm. The body of the micro-
meter mechanism is connected to the base of the microscope
rigidly connected
Translated with www.DeepL.com/Translator (free version)