Mix’n’match ‘scope

Do you have any microscopy questions, which you are afraid to ask? This is your place.
Post Reply
Message
Author
Zuul
Posts: 17
Joined: Fri May 01, 2020 9:01 pm
Location: California

Mix’n’match ‘scope

#1 Post by Zuul » Sat May 23, 2020 6:09 pm

I spotted this on fleabay and it piqued my curiosity. All the components seam to be high quality, though I’m not experienced enough to guess about condition. The Zeiss objectives on a Nikon stand/head is the oddity. I understand that Nikon objectives should be fully corrected, hence the head should not do any further correction. I don’t know about Zeiss of that generation, though. Is this a “good” match? If it is, that seams like a pretty good deal provided things are in good shape.

https://www.ebay.com/itm/Nikon-Labopho ... 3271223319

Wes
Posts: 492
Joined: Sat Mar 09, 2019 12:58 pm

Re: Mix’n’match ‘scope

#2 Post by Wes » Sat May 23, 2020 6:45 pm

These are very fine objectives, but probably delaminated .

Scarodactyl
Posts: 758
Joined: Sat Mar 03, 2018 9:09 pm

Re: Mix’n’match ‘scope

#3 Post by Scarodactyl » Sat May 23, 2020 9:29 pm

This is a finite system. Any corrections happen in the eyepieces (since the head is lensless), which in this case are Leitz correctives (usually fine with Zeiss for visual usage). It wasn't insanely uncommon to swap all the objectives and eyepieces on a stand for another brand--I got an old B&L scope that had been kitted out with some nice Zeiss stuff a while back. Produced a great image.
Not every Zeiss 160mm objective is delaminated, though ir is a common problem.

Post Reply