Excellent. Have a lot fun with the coming microscope!erikwetterskog wrote: ↑Tue Mar 26, 2024 4:28 pmYes you’re right. He switched out the tube to a trinocular tube for me! I’m really happy about this, it’s not that straightforward to find....
Search found 342 matches
- Tue Mar 26, 2024 5:19 pm
- Forum: Microscopes and optics
- Topic: Wild M8 vs Wild MZ3
- Replies: 19
- Views: 3414
Re: Wild M8 vs Wild MZ3
- Tue Mar 26, 2024 1:45 am
- Forum: Microscopes and optics
- Topic: Wild M8 vs Wild MZ3
- Replies: 19
- Views: 3414
Re: Wild M8 vs Wild MZ3
The Craigslist photo looks to me a like a dual-iris diaphragm (I can not see a third tube) but I do not have the brochures near me to check.
- Tue Mar 05, 2024 11:38 am
- Forum: For forum members who want to buy and sell equipment
- Topic: WTB: Wild M8 0.4x auxiliary lens
- Replies: 8
- Views: 2299
Re: WTB: Wild M8 0.4x auxiliary lens
I PMed Scarodactyl about one in mid-December and assume by then he had already found one. If anyone is looking for one on this side of the Atlantic, there is presently a like-new example on ebay.de for 249€ (+7€ shipping within Germany).
- Tue Feb 20, 2024 6:05 pm
- Forum: Microscopy accessories
- Topic: Wild Heerbrugg M5 power supply
- Replies: 14
- Views: 2014
Re: Wild Heerbrugg M5 power supply
I wish you luck that the differences will be inconsequential, for example, having a different lens color rather than being momentary vs. alternate action.
- Tue Feb 20, 2024 10:06 am
- Forum: Microscopy accessories
- Topic: Wild Heerbrugg M5 power supply
- Replies: 14
- Views: 2014
Re: Wild Heerbrugg M5 power supply
That 01-261 looks promising, and I might take the chance if it cheap and you are trying to avoid a little metal (re)working. It is not like you have to buy a bunch of an old part. On that note, if anyone needs a replacement fuseholder and/or cap for a Schott KL 1500 electronic halogen light source, ...
- Mon Feb 19, 2024 10:31 pm
- Forum: Microscopy accessories
- Topic: Wild Heerbrugg M5 power supply
- Replies: 14
- Views: 2014
Re: Wild Heerbrugg M5 power supply
Thanks for the picture. I would say that is a 5A/250V illuminated switch with a 60V/1.2W bulb. I believe you have a Wild MTR 22 transformer. I have an MTR 28, which has a meter instead of the lamp, that I could look at and measure. It came with a microscope made around 1980.
- Mon Feb 19, 2024 8:33 pm
- Forum: Microscopy accessories
- Topic: Wild Heerbrugg M5 power supply
- Replies: 14
- Views: 2014
Re: Wild Heerbrugg M5 power supply
You should be able to find something as that was a typical panel thickness and material back then, and Wild allowed a generous amount of room around the switch. I might want to measure the transformer's power up, inrush current to help choose a switch that can handle it.
- Sat Nov 11, 2023 8:57 am
- Forum: Camera systems and imaging
- Topic: Leica/Wild: any special advantage in different tube+optic combinations?
- Replies: 5
- Views: 2255
Re: Leica/Wild: any special advantage in different tube+optic combinations?
Thank you for those images. I gather the very last image shows the chromatic aberration I have read about, that the Wild photo system never fully got under control. What amuses me, and I have come to much appreciate, is that the Wild phototubes (directly) project the best image on to the receiver th...
- Wed Oct 25, 2023 10:45 am
- Forum: Microscopes and optics
- Topic: Nikon SMZ-10 worthwhile purchase?
- Replies: 4
- Views: 987
Re: Nikon SMZ-10 worthwhile purchase?
Could you unravel that for me?
There are plenty of good microscopes from that era, microscopes that were built to last.
There are plenty of good microscopes from that era, microscopes that were built to last.
- Fri Sep 29, 2023 8:28 am
- Forum: Camera systems and imaging
- Topic: Wild M3B with Motic 1500.3 photo-bridge
- Replies: 20
- Views: 4804
Re: Wild M3B with Motic 1500.3 photo-bridge
Sorry, I seemed to have unwittingly laid a red herring and perhaps should minimize my posts until I am fully recovered. All my photo-tubes produce an erect specimen image on the camera LCD – just the menus are upside down, which I can manage. I have three MFT cameras that I should review as microsco...
- Thu Sep 28, 2023 6:47 am
- Forum: Camera systems and imaging
- Topic: Wild M3B with Motic 1500.3 photo-bridge
- Replies: 20
- Views: 4804
Re: Wild M3B with Motic 1500.3 photo-bridge
Good job. Out of curiosity, is there a reason to have the E-PL7's LCD screen set in selfie-mode? Flipped the other way, the upper dials and buttons are unobstructed and before you. You may, however, have to adjust to reading the menus upside down. I customize the controls to minimize that and consid...
- Wed Aug 23, 2023 3:01 pm
- Forum: Camera systems and imaging
- Topic: Wild M3B with Motic 1500.3 photo-bridge
- Replies: 20
- Views: 4804
Re: Wild M3B with Motic 1500.3 photo-bridge
The c mount seems like an unnecessary intermediate in that equation, and a potential bottleneck or source of flare if you get one with a slightly tighter or less well flocked interior. Probably easier to just adapt on cheap m42 spacers, an m42 helicoid and an m42 to m4/3 adapter. I like that sugges...
- Wed Aug 23, 2023 2:17 pm
- Forum: Camera systems and imaging
- Topic: Wild M3B with Motic 1500.3 photo-bridge
- Replies: 20
- Views: 4804
Re: Wild M3B with Motic 1500.3 photo-bridge
It appears that Motic reworked the photo bridge but did not update all their brochures. I have an older adapter shown in the K-Series brochure that downloads from some of their websites. The pictured photo bridge accepts an IS0-38 to C-mount adapter very much like the Leitz 543345, only with a broad...
- Sun Aug 13, 2023 7:37 pm
- Forum: Home-made microscope adaptations
- Topic: Not happy with Cree CXA1304, what is an alternative ?
- Replies: 13
- Views: 3944
Re: Not happy with Cree CXA1304, what is an alternative ?
Some more circuit board mounted LEDs. I have bought from them since they are an authorized NIchia distributor.
- Sun Aug 13, 2023 4:42 pm
- Forum: Home-made microscope adaptations
- Topic: Not happy with Cree CXA1304, what is an alternative ?
- Replies: 13
- Views: 3944
Re: Not happy with Cree CXA1304, what is an alternative ?
Perhaps something like these? (Found after a quick search with google.de.)
- Tue Aug 01, 2023 3:51 pm
- Forum: Camera systems and imaging
- Topic: Budget camera for a Nikon AFX-II on a Labophot?
- Replies: 13
- Views: 2610
Re: Budget camera for a Nikon AFX-II on a Labophot?
I have used the E-PL1, E-PL3, E-PL7 and E-PL8 on at least, lower magnification stereo microscopes. I think you will find the tiltable screens on the E-PL3 onward to be well worth having. None of these can or are really meant to output live video for demos. You can at least wirelessly tether the PL7/...
- Sat Jun 24, 2023 6:10 am
- Forum: My microscope
- Topic: My newly refurbished gemscope
- Replies: 18
- Views: 10317
Re: My newly refurbished gemscope
Somehow I have missed this thread :? Anyways, congrats on the Wild M10 body! May I ask how much it cost you? I am finally closing a deal on a M10 myself. It comes with the 1x PlanApo objective, ergo head, 10x Leica eyepieces and a simple Wild/Leica stand.... I will keep my fingers crossed that you ...
- Wed Jun 07, 2023 7:03 pm
- Forum: Camera systems and imaging
- Topic: Full Frame Camera Prices
- Replies: 8
- Views: 2971
Re: Full Frame Camera Prices
Well, sure, APS-C cameras can be very good, but that's missing the point of the post : if you use those on a BH2, you're going to deal with substantial FOV crop. You want full frame because that is the format these scopes were designed to project on to.... How was Olympus's support of contemporary ...
- Sun Jun 04, 2023 10:16 am
- Forum: Microscopy accessories
- Topic: How is fixed column on bottom of this Wild stand (374924) ?
- Replies: 8
- Views: 2182
Re: How is fixed column on bottom of this Wild stand (374924) ?
From the looks of it, I would think the 25/30mm takes smaller, top side screws.
- Sun Jun 04, 2023 9:48 am
- Forum: Microscopy accessories
- Topic: How is fixed column on bottom of this Wild stand (374924) ?
- Replies: 8
- Views: 2182
Re: How is fixed column on bottom of this Wild stand (374924) ?
I found four ISO 4762 M8x70mm, blackened steel, hexagon socket head cap screws. I believe the screws are in blind, threaded holes.
This would be for the older, more massive variant (with a 50mm rear post) of the stand pictured above.
This would be for the older, more massive variant (with a 50mm rear post) of the stand pictured above.
- Sun Jun 04, 2023 8:53 am
- Forum: Microscopy accessories
- Topic: How is fixed column on bottom of this Wild stand (374924) ?
- Replies: 8
- Views: 2182
Re: How is fixed column on bottom of this Wild stand (374924) ?
Do you mean what clamps the carrier post at the tilt you want: at the top end of the silver column holding the microscope in the following picture? 374924_stand.gif Hmmm. Not only have I answered your question with a question, I found a photograph that manages to hide the adjustable clamp lever you ...
- Sat May 27, 2023 3:40 pm
- Forum: Home-made microscope adaptations
- Topic: American Optical Series 10 LED replacement for 1036A
- Replies: 33
- Views: 10118
Re: American Optical Series 10 LED replacement for 1036A
The XL6019 is an XLSEMI boost regulator IC – the heart of the DC/DC converter module you are using? It is indeed based on the XLSEMI chip; however, the limit of the XLSEMI is around 40v so it won't boost to the level needed for the Mean Well's > 90v.... The IDLC-25 takes 90-295VAC mains voltage and...
- Sat May 27, 2023 1:58 pm
- Forum: Home-made microscope adaptations
- Topic: American Optical Series 10 LED replacement for 1036A
- Replies: 33
- Views: 10118
Re: American Optical Series 10 LED replacement for 1036A
... To provide the right output voltage I used a XL6019 30W 5A DC boost converter; there are probably better solutions out there and I'd like to hear them especially if they don't significantly add to the budget.... The XL6019 is an XLSEMI boost regulator IC – the heart of the DC/DC converter modul...
- Mon May 15, 2023 6:47 am
- Forum: Microscopes and optics
- Topic: Inverted vs Stereoscope or Compound for Pond water organisms
- Replies: 51
- Views: 31235
Re: Inverted vs Stereoscope or Compound for Pond water organisms
... I guess you didn't need to do threading on the holes in the aluminium plate? If you need to, you can use the drill press for that. Roll/form taps are the bee's knees for aluminum – but more exacting. I clamp the workpiece in a drill press vise and use it and the drill press to drill true three ...
- Sun Apr 23, 2023 6:49 pm
- Forum: Home-made microscope adaptations
- Topic: Searching Cree LED for tiny dimmers
- Replies: 23
- Views: 20900
Re: Searching Cree LED for tiny dimmers
Unfortunately, my oldish browser is not properly rendering the above links so I do not know the technical particulars of those dimmers. I expect you will have to add a current limiting resistor in series with the LED, sized for its operating current, so that the LED can operate off the constant 12V,...
- Sun Apr 23, 2023 2:26 am
- Forum: Home-made microscope adaptations
- Topic: Searching Cree LED for tiny dimmers
- Replies: 23
- Views: 20900
Re: Searching Cree LED for tiny dimmers
I need more light and did the converse: I found a flickerless dimmer to drive a particular CREE LED. More specifically, I found a MEAN WELL IDLC-25 , dimmable, constant current power supply to drive an 18W COB LED. That way the LED (and illumination) come first and there is much less risk of buying ...
- Fri Mar 24, 2023 4:13 pm
- Forum: Beginner's corner
- Topic: Advice needed-Monocular with a camera attached
- Replies: 20
- Views: 3724
Re: Advice needed-Monocular with a camera attached
It does for me when I attach the microscope as a "manual lens" using an MFT to c-mount thread adapter:
- Fri Mar 24, 2023 11:36 am
- Forum: Beginner's corner
- Topic: Advice needed-Monocular with a camera attached
- Replies: 20
- Views: 3724
Re: Advice needed-Monocular with a camera attached
My eyes are full of floaters and chunks of a detached retina so focusing accurately on a camera screen is difficult without the camera's focus magnifier, especially with lower magnifications.... If the camera has it, have you tried focus peaking? I have found it to be quicker and more convenient th...
- Sat Mar 11, 2023 5:57 pm
- Forum: Home-made microscope adaptations
- Topic: Putting Led in place of original filament lamp in an Olympus SZ1145CHI
- Replies: 16
- Views: 5220
Re: Putting Led in place of original filament lamp in an Olympus SZ1145CHI
I'm surprised by this poor result as this led (3w) is given as equivalent (in brightness) to an halogen 6volts 20 watts bulb in the origin SZ1145CHI lighting system.... Have you compared the LED's brightness outside of the microscope to a 20W incandescent bulb? Who makes the LED and does it have a ...
- Sat Mar 04, 2023 1:37 pm
- Forum: Digital processing
- Topic: GoPro UHD Actioncam on a microscope? Adapter?
- Replies: 3
- Views: 3307
Re: GoPro UHD Actioncam on a microscope? Adapter?
Apparently, you can no longer remove the front lens of a Hero 8 which may be why the above company makes a c-mount microscope camera out of a Hero 7. It is something I have done rather little, but I could imagine that the best you can do is afocal projection – which is what you have tried – from the...