Search found 182 matches
- Sat Jan 30, 2021 4:59 pm
- Forum: For forum members who want to buy and sell equipment
- Topic: where can I buy metric cheese head screws
- Replies: 10
- Views: 4196
Re: where can I buy metric cheese head screws
I got info, from groups.io/g/Microscope/topic forum, that diversecomponents made cheese head screws. So I searched for diverscomponents and one hit was ebay UK where Diverse Components, under the name diversec, and GWR-fasteners sell brass and stainless steel metric and BA cheese head screws. Based ...
- Tue Jan 26, 2021 3:05 am
- Forum: Microscopes and optics
- Topic: AO series 10 loose mirror
- Replies: 35
- Views: 10886
Re: AO series 10 loose mirror
I like your thought on the alignment.
- Fri Jan 22, 2021 8:13 pm
- Forum: Microscopes and optics
- Topic: Leitz 170mm TL to 160mm TL microscope conversion
- Replies: 7
- Views: 3707
Re: Leitz 170mm TL to 160mm TL microscope conversion
You might try this microscope site (groups.io/g/Microscope/topic). It has loads of info and members are very active. I asked a question about cheese head metric screws and within three days there were 42 replies.
- Thu Jan 21, 2021 10:16 pm
- Forum: Microscopes and optics
- Topic: objective comparison
- Replies: 3
- Views: 1940
objective comparison
Is one of these objectives considered optically better and why? Leitz PL 40/0.65 170/0.17 vs Leitz NPL 40/0.65 170/0.17.
Thanks,
henryr
Thanks,
henryr
- Thu Jan 21, 2021 10:15 pm
- Forum: Microscopes and optics
- Topic: objective comparison
- Replies: 0
- Views: 1223
objective comparison
Is one of these objectives considered optically better and why? Leitz PL 40/0.65 170/0.17 vs Leitz NPL 40/0.65 170/0.17.
Thanks,
henryr
Thanks,
henryr
- Tue Jan 19, 2021 5:11 am
- Forum: For forum members who want to buy and sell equipment
- Topic: where can I buy metric cheese head screws
- Replies: 10
- Views: 4196
Re: where can I buy metric cheese head screws
That kind of thing I have been getting from China on ebay lately. You can get small or large quantities for peanuts, if you don't mind and do you mind me asking what they are for and how many do you need of each? Back in 2015 when I converted my 170mm TL dialux to 160mm TL I designed and machined a...
- Mon Jan 18, 2021 9:10 pm
- Forum: For forum members who want to buy and sell equipment
- Topic: where can I buy metric cheese head screws
- Replies: 10
- Views: 4196
Re: where can I buy metric cheese head screws
I got a recommendation to try https://www.accu.co.uk/13-cheese-head-screws and they will sell even one piece. I ordered everything needed and the total cost, including shipping was very reasonable.
- Mon Jan 18, 2021 6:34 pm
- Forum: For forum members who want to buy and sell equipment
- Topic: where can I buy metric cheese head screws
- Replies: 10
- Views: 4196
Re: where can I buy metric cheese head screws
Thanks for the reply. I'm on the east coast of the USA. I only need six of each size and they are for some mods I'm trying on a dialux.
- Mon Jan 18, 2021 5:44 pm
- Forum: For forum members who want to buy and sell equipment
- Topic: where can I buy metric cheese head screws
- Replies: 10
- Views: 4196
where can I buy metric cheese head screws
Hi all, I need a small quantity of M3 and M4 metric cheese head screws and after searching the web for the last two days I found them but min. quantities are 50 or 100 pieces. I did find one distributor in the UK but would still have to buy 30 pieces. MRMETRIC sold small quantities but they closed i...
- Sat Jan 16, 2021 4:09 am
- Forum: Microscopes and optics
- Topic: Leitz 170mm TL to 160mm TL microscope conversion
- Replies: 7
- Views: 3707
Re: Leitz 170mm TL to 160mm TL microscope conversion
I'm sorry but I really can't help. Five years ago I only disassembled the stage, and a few other parts, but not the focusing block.
- Thu Jan 14, 2021 2:39 am
- Forum: Microscopes and optics
- Topic: Leitz 170mm TL to 160mm TL microscope conversion
- Replies: 7
- Views: 3707
Leitz 170mm TL to 160mm TL microscope conversion
In 2015 I posted about my effort to convert my Dialux 170mm TL scope to 160mm TL. The reason was I bought the 170mm TL Dialux stand with no head, eyepieces or objectives and I had 160mm eyepieces and objectives. Below are details of the conversion using a 160mm TL head. Since the Leitz 160mm TL trin...
- Sat Jan 02, 2021 6:03 pm
- Forum: Microscopes and optics
- Topic: Leitz trinoc head 42mm 512/738 question
- Replies: 27
- Views: 9740
Re: Leitz trinoc head 42mm 512/738 question
My head only has two screws, on top, near the front, four screws on the bottom cover and four screws inside and at the bottom of the photo tube.
- Sat Jan 02, 2021 3:39 pm
- Forum: Microscopes and optics
- Topic: Leitz trinoc head 42mm 512/738 question
- Replies: 27
- Views: 9740
Re: Leitz trinoc head 42mm 512/738 question
Thanks again but I would still like to know what screws were removed to remove the front section, with eyepiece tubes, interpupillary slides and front frame, shown in the 1st photo.
- Sat Jan 02, 2021 2:57 am
- Forum: Microscopes and optics
- Topic: Leitz trinoc head 42mm 512/738 question
- Replies: 27
- Views: 9740
Re: Leitz trinoc head 42mm 512/738 question
Thanks so much. Your replies and photos have provided the much needed info to allow me to disassemble my head with confidence. There is only one difference i see between the heads. Mine has a metal cover plate between the right and left slides, that is attached to and moves with the right side slide...
- Sat Jan 02, 2021 2:22 am
- Forum: Microscopes and optics
- Topic: Leitz trinoc head 42mm 512/738 question
- Replies: 27
- Views: 9740
Re: Leitz trinoc head 42mm 512/738 question
Thanks so much. If you can tell me how you were able to remove the front section, with eyepiece tubes, interpupillary slides and front frame, shown in the 1st photo, I believe you have provided the info I need to disassemble the head.
- Fri Jan 01, 2021 9:19 pm
- Forum: Microscopes and optics
- Topic: Leitz trinoc head 42mm 512/738 question
- Replies: 27
- Views: 9740
Re: Leitz trinoc head 42mm 512/738 question
Thanks so much for the photos. The knob, on top near the back that rotates the belt, works great on my head. What I would really like to see are the steps required to remove the interpupillary slides. I want to remove them so I can clean and relube them and the surfaces they slide against.
- Thu Dec 31, 2020 5:00 pm
- Forum: Microscopes and optics
- Topic: Leitz trinoc head 42mm 512/738 question
- Replies: 27
- Views: 9740
Re: Leitz trinoc head 42mm 512/738 question
So I'm still looking for a diagram of my trinoc head. Has anyone disassembled a head similar to mine?
- Mon Dec 28, 2020 8:35 pm
- Forum: Microscopes and optics
- Topic: Leitz Metalloplan HL tube length
- Replies: 0
- Views: 1144
Leitz Metalloplan HL tube length
Does anyone know if the Metalloplan HL is 160mm TL?
Thanks,
henryr
Thanks,
henryr
- Sun Dec 27, 2020 2:50 am
- Forum: Microscopes and optics
- Topic: Leitz APO 8mm Apochromat 24X/0.65 Microscope Objective Lens
- Replies: 3
- Views: 1445
Re: Leitz APO 8mm Apochromat 24X/0.65 Microscope Objective Lens
It is marked A=0,65 24:1 and thought it might be a good addition to my circa 1975 Dialux that I converted to 160mm TL.
- Sun Dec 27, 2020 1:56 am
- Forum: Microscopes and optics
- Topic: Leitz APO 8mm Apochromat 24X/0.65 Microscope Objective Lens
- Replies: 3
- Views: 1445
Leitz APO 8mm Apochromat 24X/0.65 Microscope Objective Lens
I'm guessing the description means it is a 24x mag objective but what does the 8mm refer to? And is it a 170mm or 160mm?
Thanks,
henryr
Thanks,
henryr
- Thu Dec 24, 2020 4:32 pm
- Forum: Microscopes and optics
- Topic: Leitz head needing some work
- Replies: 10
- Views: 4474
Re: Leitz head needing some work
The reasons for my original post was to make interpupillary adjustment work easier and to get better access to clean the front surface of the protective windows. The movement of the tubes is now fixed. So I only need to clean the windows. And If they are just plain uncoated glass, I could be more ag...
- Thu Dec 24, 2020 3:35 am
- Forum: Resources (online, books etc.)
- Topic: Leitz SM manual
- Replies: 5
- Views: 6713
Re: Leitz SM manual
My Leitz SM-M has the same stage with the same markings and the scope was made in 1969. It is an excellent piece of equipment.
- Thu Dec 24, 2020 12:06 am
- Forum: Microscopes and optics
- Topic: Leitz head needing some work
- Replies: 10
- Views: 4474
Re: Leitz head needing some work
There is also the central front cover, between the tube flanges, held in place with with three small screws. Is that to be removed? And how do I remove the photo tube? After it is removed are the two exposed screws and the two screws on the top near the front to be removed? A schematic or service ma...
- Wed Dec 23, 2020 1:55 am
- Forum: Microscopes and optics
- Topic: Leitz head needing some work
- Replies: 10
- Views: 4474
Re: Leitz head needing some work
I meant to add the following to my previous post but hit submit to fast. The interpupillary adjustment is now easy and as smooth as butter. The process included positioning the head on its side and putting a few very small drops of Hoppes #9 gun oil at the edges of the interface of the dovetails. I ...
- Wed Dec 23, 2020 1:35 am
- Forum: Microscopes and optics
- Topic: Leitz head needing some work
- Replies: 10
- Views: 4474
Re: Leitz head needing some work
Thanks for the help. There are two screws on the top and four screws on the bottom shown in photos. I also thought, as an aid to realignment of the tubes, I could put small pieces of masking tape on the horizontal and vertical sides of the tube mounting flanges and adjacent slide surfaces that they ...
- Sun Dec 20, 2020 7:58 pm
- Forum: Microscopes and optics
- Topic: Leitz head needing some work
- Replies: 10
- Views: 4474
Re: Leitz head needing some work
Thanks so much. While my head is different, in that interpupillary adjustment is done by pulling or pushing on the outer edges of the slides, the info and parts diagram sheds some light on what to expect. And, now that it is apparent that Leitz did produce a parts list with an exploded diagram for t...
- Sun Dec 20, 2020 3:57 pm
- Forum: Microscopes and optics
- Topic: Leitz head needing some work
- Replies: 10
- Views: 4474
Leitz head needing some work
The interpupillary distance adjustment on my 160mm TL trinocular head is sticky and requires more effort than it should. How can I get access to clean and lube the slides? And can the four screws securing each eyepiece tube be removed, without disengaging anything else, so I can get better access to...
- Fri Dec 18, 2020 6:19 pm
- Forum: My microscope
- Topic: Leitz SM Medical Microscope
- Replies: 31
- Views: 22169
Re: Leitz SM Medical Microscope
I wasn't proposing that you scope is an SM. Based on photos in the Leitz document, in the link I sent, I thought your scope looked much more like a labolux or laborlux because of the angled front surface.
- Thu Dec 17, 2020 4:28 pm
- Forum: My microscope
- Topic: Leitz SM Medical Microscope
- Replies: 31
- Views: 22169
Re: Leitz SM Medical Microscope
Great looking scope But why do you think it is a SM-M? There is a pdf on the web that has, on the last page, what looks like a Leitz document showing the black microscope series and years they were made or available. It seems all the scopes in the SM section show the front surface of the focusing bl...
- Wed Dec 16, 2020 11:31 pm
- Forum: Microscopes and optics
- Topic: Leitz ACHR 0.90 S1.1
- Replies: 1
- Views: 1394
Re: Leitz Achr 0.90
So I was looking at another spare Achr 0.90 flip-out lens and it has many black specks that are not on the front or back surfaces. Is this made up of two lens? Is there a way to disassemble this lens? I would gladly attempt to clean it because in its present condition it is worthless.