100w 12 v base
100w 12 v base
Hi y'all this connector is for a leitz lamp, 100w 12 v halogen, gy 6.35 the plate seems to be cracked and the reason why the bulb isn't getting current. The back is labeled Thorn L1079, any Ideas on a replacement option for this?
- Attachments
-
- IMG_20210810_115901266.jpg (87.76 KiB) Viewed 3007 times
-
- IMG_20210810_115830164.jpg (80.62 KiB) Viewed 3007 times
-
- IMG_20210810_115816632.jpg (62.52 KiB) Viewed 3007 times
Re: 100w 12 v base
Generic bi-pin sockets are available. The two screw locations might not match, but perhaps you could make an adapter plate?
Re: 100w 12 v base
This looks very similar : https://www.enrgtech.co.uk/product/lamp ... 908653/217
U.K. seller shown, but Stucchi probably distributes worldwide
MichaelG.
U.K. seller shown, but Stucchi probably distributes worldwide
MichaelG.
Too many 'projects'
Re: 100w 12 v base
Thank you all for the help, purchased a lamp holder, had to cut excess heat shielding so it would fit and install spacers to maintain the 67.7mm bulb insertion. The two prong airplane style connector worked perfectly.
- Attachments
-
- IMG_20210817_131157957.jpg (53.32 KiB) Viewed 2906 times
-
- IMG_20210817_130305628.jpg (33.14 KiB) Viewed 2909 times
-
- Posts: 1186
- Joined: Tue Oct 20, 2020 6:44 am
Re: 100w 12 v base
You certainly did a good job with that.