Having got a SZ1145 body alone, I made a base for it with an oak glulam piece , inox bar and an aluminium machined support.
A cross bracket bearing column Tube for connecting horizontal and vertical tubes was bought in China
As no power supply for its halogen lighting I made an adaptation with a 3W led for coaxial illuminator (see here: https://www.microbehunter.com/microscop ... 12&t=17701 ).
Now it is well functional, even is led light is weak,
The old unused halogen part is at the foot of inox vertical tube and perhaps it will be necessary to rebuilt this one to have a correct lighting!