Hello
Anybody knows the use of this part?
I suppose it is a polarizer system as the bottom part could be turn around completely or moved aside
But I don't know how it is supposed to work and with which stereomicroscope?
But both parts seem to be delaminated.....
Wild polarizer part ?
-
- Posts: 2804
- Joined: Sat Mar 03, 2018 9:09 pm
Re: Wild polarizer part ?
Weird. Looks like their swing-out 2x that would have fit the m5/m7.
Re: Wild polarizer part ?
This part fit on a 58 mm (diameter) objective, therefore not a M8.....
I've also a similar one, but with no "glass" on its side to fix on an objective!
It could also be place under the M420 objective to receive a polarizer filter.....
Better then holding it by hand
I've also a similar one, but with no "glass" on its side to fix on an objective!
It could also be place under the M420 objective to receive a polarizer filter.....
Better then holding it by hand
-
- Posts: 761
- Joined: Thu Aug 23, 2018 10:12 pm
- Location: Lund, Sweden
Re: Wild polarizer part ?
58mm matches the diameter of my Wild M5 objective.
Re: Wild polarizer part ?
I have used this item (supposed to be a Wild M5 accessory) in order to make a support for circular pol. filter adapted for my Leica M420!
I could screw on it a new 43mm pol. filter for camera, once removing unusefull parts and making a new screw setting allowing to move the circular pol. filter.
So it's better then just holding filter by hand under the zoom
I could screw on it a new 43mm pol. filter for camera, once removing unusefull parts and making a new screw setting allowing to move the circular pol. filter.
So it's better then just holding filter by hand under the zoom