WANTED Olympus U-READB
-
- Posts: 6
- Joined: Sat Jun 25, 2022 1:42 pm
WANTED Olympus U-READB
I’m cobbling together a microscope and I would like to upgrade the revolving nosepiece of a BX40 to a 6-place turret with analyzer slot. I believe I need the U-READB to properly adapt from the BX40 to the new turret. If anyone has a lead on a U-READB for sale, I would greatly appreciate it!
Re: WANTED Olympus U-READB
As you've discovered, they're hard to find. Hopefully someone here can help you.
One work-around if you have access to machine tools to get six place turrets is to adapt your BX40 to to BH2 nosepieces. A six place BX nosepiece might be $250 plus. You could buy a couple BH2 era of equal quality for that. Somewhere on this site are pix of the one I made years ago.
One workaround for the analyzer is to put an intermediate piece above the stand.
One work-around if you have access to machine tools to get six place turrets is to adapt your BX40 to to BH2 nosepieces. A six place BX nosepiece might be $250 plus. You could buy a couple BH2 era of equal quality for that. Somewhere on this site are pix of the one I made years ago.
One workaround for the analyzer is to put an intermediate piece above the stand.
-
- Posts: 6
- Joined: Sat Jun 25, 2022 1:42 pm
Re: WANTED Olympus U-READB
Thanks! I think I did see your post about adapting bh2 turrets to bx40. I will give some more thought to which direction I want to go.