Making Permanent Microscope Slides of Insects

Articles and images posed here will be included in the PDF and paper version of the magazine (you can also send them by email). All are invited to contribute!
Post Reply
Message
Author
AntoniScott
Posts: 91
Joined: Tue Dec 24, 2019 3:54 pm

Making Permanent Microscope Slides of Insects

#1 Post by AntoniScott » Tue May 26, 2020 8:09 pm

Can anyone recommend books or publications on how to make permanent slides of insects , large and small. I have general ideas but would like tried-and-true methods.

About six decades ago I had a book on slide making which has been long misplaced or lost. It was very thorough, right down to the processing of the dark insect exoskeletons with Potassium Hydroxide, dehdration and then using clove oil as a clearing agent.Today I use Xylene. Does anyone know if clove oil is a better clearing agent than xylene because I know that xylene is very toxic ?

I remember the book stating that flattening the insect was accomplished by rolling it with a wooden handle from a dissecting needle. This part was very tricky as it was easy to break off legs, etc.

Today, I flatten the insects between two glass slides carefully squeezing the slides together while observing through a stereo microscope to ensure not over squeezing. To prevent this I use a shim such as a piece of index card. If the insect is very big and very dark, I over-"cook" the insect in Potassium Hydroxide (I make a saturated solution of KOH) and then flatten using two paper shims to double the space between the two slides. I then hold the slides together with small paper clips. The dehydration process is not affected by this small space between the glass slides but to make sure that there is an exchange of water and alcohol with higher concentrations, I dunk the slides in and out of the alcohol several time visually confirming that the alcohol leaves the slide before re-introducing.

There is much more that I do not remember so any professional documentation on insect slide preparation will be much appreciated.

dtsh
Posts: 826
Joined: Wed May 01, 2019 6:06 pm
Location: Wisconsin

Re: Making Permanent Microscope Slides of Insects

#2 Post by dtsh » Tue May 26, 2020 9:51 pm

I don't have much to contribute except to say that I am also looking into this subject.

I've just completed reading the following and am still digesting the contents, I hope it will be useful to you.

http://www.microscopy-uk.org.uk/mag/ind ... part5.html

User avatar
wporter
Posts: 353
Joined: Wed Oct 21, 2015 10:18 pm
Location: United States

Re: Making Permanent Microscope Slides of Insects

#3 Post by wporter » Tue May 26, 2020 9:54 pm

Insect Microscopy, by Chick, has quite a bit on making insect slides.

photomicro
Posts: 207
Joined: Thu Aug 03, 2017 10:28 am
Location: UK

Re: Making Permanent Microscope Slides of Insects

#4 Post by photomicro » Wed May 27, 2020 10:50 am

There was quite a bit on this subject within the booklets published by NBS (Northern Biological Supplies) in the UK in the 1970s.

These were done by Eric Marson, and can often be picked up as separate booklets on each topic, or as a bound volume of all 17 booklets.

Eric taught a great deal, and tutored Ernie Ives who carried on making slides, particularly insects and wood sections for many years.

He wrote about his techniques in the journal of the Postal Microscopical Society, 'Balsam Post' over nearly 20 years, giving very detailed practical instructions.

Over 70 of these articles are being made into two volumes at present, though with the current situation re CV-19 I am unsure when they will be available.

DavidJohn123
Posts: 1
Joined: Mon Jan 24, 2022 10:02 am
Location: United States
Contact:

Re: Making Permanent Microscope Slides of Insects

#5 Post by DavidJohn123 » Mon Jan 24, 2022 10:10 am

To keep your pre-arranged magnifying instrument slides in great condition, consistently store them in a compartment made for the reason and away from heat and splendid light. The ideal stockpiling region is a cool, dull area, for example, a shut bureau in a temperature-controlled room. Stained slides normally blur over the long haul.

tgss
Posts: 223
Joined: Wed Jan 25, 2017 3:48 am
Location: Ontario, Canada

Re: Making Permanent Microscope Slides of Insects

#6 Post by tgss » Mon Jan 24, 2022 12:47 pm

photomicro mentioned the compilation of Ernie Ives articles by the Postal Microscopical Society. The two volumes have been available for some time, I purchased my copies a year ago, and in fact the print run may have sold out by now. The books cover preparation of many kinds of specimens, but a large percentage of the coverage is devoted to insects. So I would probably rate the books as "must haves" for those interested in insect subjects. You could check the Society web site for contact info and enquire about the current availability of the books.
Tom W

photomicro
Posts: 207
Joined: Thu Aug 03, 2017 10:28 am
Location: UK

Re: Making Permanent Microscope Slides of Insects

#7 Post by photomicro » Tue Jan 25, 2022 9:16 am

tgss wrote:
Mon Jan 24, 2022 12:47 pm
photomicro mentioned the compilation of Ernie Ives articles by the Postal Microscopical Society. The two volumes have been available for some time, I purchased my copies a year ago, and in fact the print run may have sold out by now. The books cover preparation of many kinds of specimens, but a large percentage of the coverage is devoted to insects. So I would probably rate the books as "must haves" for those interested in insect subjects. You could check the Society web site for contact info and enquire about the current availability of the books.
Tom W
Down to about a dozen sets now...I doubt very much if it will get re-printed.

charlie g
Posts: 1625
Joined: Mon Oct 20, 2014 7:54 pm

Re: Making Permanent Microscope Slides of Insects

#8 Post by charlie g » Thu Jan 27, 2022 6:12 pm

"Insect Microscopy", Andrew Chick, 2017..available low cost on eBay, on Amazon..Andy a forensic insect entomologist in UK, his text covers materials and methods, hobbyist insect microscopist chemicals/ mountants...and more. all the best, charlie g

Post Reply