DIY Slide Ringing

[MitchW]

Hello all,
Happy holidays to everyone.

Oliver sparked my imagination and creativity and I made a DIY slide ringing apparatus using old CD disks, a large bolt, large fender washer and some epoxy. Inserted into a hand drill it works pretty well.

[Nubee-70]

Pity I cannot see the image to get a better idea of what you are describing.

[Milou]

Same for me: no image!

[cmug]

Seems to my: (to) difficult to use this design
(read here fore better options

[dedalus]

I have used a round disposable food container cover the diameter of a slide, double sided tape in it, the center is marked by the plastic injection point. And I turned it with my left hand against my keyboard with a small box in front of it making a 90º corner. I ringed with the right hand using nail polish. It's so thick that i can't understand why a higher end solution would be useful if a more specialized coating is not used. There are more important problems with samples preparation.
If you want to make a wall for a square coverglass a ringing setup wouldn't even be useful anymore.