Could I see the bacteria in aquarium sustrate?
Could I see the bacteria in aquarium sustrate?
Hi. I started with a cheap microscope, because I needed it to identify some aquarium algae plague, but I really enjoy the time I spend looking through the microscope, So I took one more step, and buyed a Swift SB350B. I discovered this wonderfull.... Now I want to take a look for autophic and heterotrophic bacteria living in the sustrate... is that possible? I am newbie, so I have no idea how to proceed, if taking a sustrate sample will be enought, or if I must do a culture in a petri dish, or what. Even I am not sure if I can see those bacteria in my microscope... so, please, could you point me in the right direction? What should I do?
THANKS
THANKS
Re: Could I see the bacteria in aquarium sustrate?
Hello Josep, there are a lot of types of bacteria which are large enough to be observed moving about with simple transmitted light microscopy of wetmount slides ( a very thin layer of water sample under a glass coverslip placed on the glass microscope slide).
Please tell us the range of microscope objectives you have on your currently enjoyed microscope? charlie g, fingerlakes/US
Please tell us the range of microscope objectives you have on your currently enjoyed microscope? charlie g, fingerlakes/US
-
- Posts: 3353
- Joined: Sun Mar 22, 2020 10:06 am
- Location: Winnipeg, Manitoba, Canada
Re: Could I see the bacteria in aquarium sustrate?
Use the highest magnification you have. Use a bright bright field. Close the iris down to get maximum depth of field. You will see them.
Re: Could I see the bacteria in aquarium sustrate?
First, thank you for the answers. The magnification levels I have are 40X, 100X, 250X, 400X, 1000X, and 2500X. The microscope comes with 4x, 10x, 40x and a 100x oil inmersion objetive, and the eyepieces are 10x and 25x.
Re: Could I see the bacteria in aquarium sustrate?
.
If you use oblique illumination you don't have to close down the condenser iris nearly as much - improving resolution and giving a cleaner brighter image.
Remember that the condenser for medium and high magnification objectives should be up close to the bottom of the slide, say a couple of mm or so from it.
http://www.microscopy-uk.org.uk/mag/ind ... lique.html
If you use oblique illumination you don't have to close down the condenser iris nearly as much - improving resolution and giving a cleaner brighter image.
Remember that the condenser for medium and high magnification objectives should be up close to the bottom of the slide, say a couple of mm or so from it.
http://www.microscopy-uk.org.uk/mag/ind ... lique.html
Zeiss Standard WL (somewhat fashion challenged) & Wild M8
Olympus E-P2 (Micro Four Thirds Camera)
Olympus E-P2 (Micro Four Thirds Camera)
Re: Could I see the bacteria in aquarium sustrate?
I made some PLA 3D printed dark field filters, this could be right? Anyway I will try to find how filters for oblique ilumination are designed... maybe I can print them too.75RR wrote: ↑Thu Apr 29, 2021 9:58 am.
If you use oblique illumination you don't have to close down the condenser iris nearly as much - improving resolution and giving a cleaner brighter image.
Remember that the condenser for medium and high magnification objectives should be up close to the bottom of the slide, say a couple of mm or so from it.
http://www.microscopy-uk.org.uk/mag/ind ... lique.html
Thanks.
Re: Could I see the bacteria in aquarium sustrate?
Here's a link to a post in this forum where a member shared a set of filter designs for 3D printing.I will try to find how filters for oblique illumination are designed... maybe I can print them too