Page 1 of 1
Labophot filter holder
Posted: Thu Feb 02, 2023 3:39 am
by sreynolds
I want to add a filter holder to the .90 Achr flip-out condenser on my Labophot. Anybody have experience with something like
this? Any other options? Thanks.
- Untitled.jpg (61.91 KiB) Viewed 1422 times
Re: Labophot filter holder
Posted: Thu Feb 02, 2023 8:27 pm
by blekenbleu
sreynolds wrote: ↑Thu Feb 02, 2023 3:39 am
filter holder to the .90 Achr flip-out condenser on my Labophot
See
https://www.microbehunter.com/microscop ... 14&t=10263
Re: Labophot filter holder
Posted: Thu Feb 02, 2023 9:43 pm
by sreynolds
Helpful link to previous post, thank you. I'll look more closely at the Abbe 1.25 condenser.
Re: Labophot filter holder
Posted: Tue Feb 21, 2023 2:14 am
by sreynolds
I got an Abbe 1.25 condenser and the darkfield filter set
from here and am pretty pleased with results so far. I've only used a couple of the filters, but here is one image taken with the 4x objective - stonefly larvae.
- EOS M200_1859a.JPG (154.18 KiB) Viewed 1114 times
This is just a single shot, no stacking, no sharpening. Works well for doing the ID work I want.
- darkfield adapter.jpg (14.53 KiB) Viewed 833 times
The rotating filter holder that goes on the bottom of the adapter can be used with a variety of 32mm filters; I am using it to hold the
bottom polarizer for polarized illumination, with the Nikon analyzer placed between the scope body and head.