What is the diference beetween a Splan Apo and Neo Splan NIC??
What is the diference beetween a Splan Apo and Neo Splan NIC??
Hi guys,
I'm new to microscopy (I got an Olympus BH2-BHS) and after some research, I found that the best image quality you will achieve is with SPlan Apo's.
But recently I discovered the Neo Splan ( the ones labelled with NIC on the barrel) and after reading about it, the most conclusive I found about these objectives ( ...they offer superior optical performance...).
I know that the standard Splan Apo fits on my BH2 and that a Neo Splan NIC (has 26mm dim and requires the prisms).
Ignoring the accessories required that you need to use the objectives and prices, which one will give you a better image quality a SPlan Apo or a Neo Splan NIC?
Also, on the Neo Splan NIC, I read that they are used for metallurgy. Can they be used for pond life observations or only for metallurgy?
Regards,
Andrie
I'm new to microscopy (I got an Olympus BH2-BHS) and after some research, I found that the best image quality you will achieve is with SPlan Apo's.
But recently I discovered the Neo Splan ( the ones labelled with NIC on the barrel) and after reading about it, the most conclusive I found about these objectives ( ...they offer superior optical performance...).
I know that the standard Splan Apo fits on my BH2 and that a Neo Splan NIC (has 26mm dim and requires the prisms).
Ignoring the accessories required that you need to use the objectives and prices, which one will give you a better image quality a SPlan Apo or a Neo Splan NIC?
Also, on the Neo Splan NIC, I read that they are used for metallurgy. Can they be used for pond life observations or only for metallurgy?
Regards,
Andrie
-
- Posts: 2804
- Joined: Sat Mar 03, 2018 9:09 pm
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
The neo splans are meant for looking at opaque subjects with nothing transparent on top of them. That matters less at lower magnifications, but at higher magnifications you will get bad results looking at pond life.
In terms of optical quality, when set up with the correct optics (an extra lens is needed compared with normal finite objectives from the series) they have very good color correction and a wide field, similar to mplanfl fluorites in Olympus's next series.
In terms of optical quality, when set up with the correct optics (an extra lens is needed compared with normal finite objectives from the series) they have very good color correction and a wide field, similar to mplanfl fluorites in Olympus's next series.
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
Please be informed the “front lens - to - sample” distance of the Olympus SPlanApo series is (very) short (starting with the 20*), so a bit risky in beginners hands.I found that the best image quality you will achieve is with SPlan Apo's.
I love my 20* SPlanApo (actually have 2) but use it most of the time in a “normal” SPlan or DPlan set.
The standard Achromats served me well the first 30 years of my micro journey.
In addition the “wider” view of the SPlan - compared to the DPlan or standard achromats - is only accessible when using the “wide” Bino/Trino head.
And if you ever aspire to move into DIC: the Olympus BH2 DIC set was designed for the normal SPlan series, not the Apo variant.
YMMV though.
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
I understand. I am asking because I own a nose turret with DIC prisms for 26mm diameter objectives.Scarodactyl wrote: ↑Tue Jan 02, 2024 7:57 pmThe neo splans are meant for looking at opaque subjects with nothing transparent on top of them. That matters less at lower magnifications, but at higher magnifications you will get bad results looking at pond life.
In terms of optical quality, when set up with the correct optics (an extra lens is needed compared with normal finite objectives from the series) they have very good color correction and a wide field, similar to mplanfl fluorites in Olympus's next series.
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
I have no problem with the “front lens - to - sample” distance, I am very cautious.deBult wrote: ↑Wed Jan 03, 2024 6:40 pmPlease be informed the “front lens - to - sample” distance of the Olympus SPlanApo series is (very) short (starting with the 20*), so a bit risky in beginners hands.I found that the best image quality you will achieve is with SPlan Apo's.
I love my 20* SPlanApo (actually have 2) but use it most of the time in a “normal” SPlan or DPlan set.
The standard Achromats served me well the first 30 years of my micro journey.
In addition the “wider” view of the SPlan - compared to the DPlan or standard achromats - is only accessible when using the “wide” Bino/Trino head.
And if you ever aspire to move into DIC: the Olympus BH2 DIC set was designed for the normal SPlan series, not the Apo variant.
YMMV though.
This is the microscope I own ( Dplan objectives).
I will try DIC later on.
Thank You for your help.
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
Looks like you have the standard Trino head not the wide version: so no advantage in the wider view when switching from DPlan to SPlan objectives.
Looks like you have the SC flip top condensor: so max useful objective NA is in the 0.9-1.0 range, and no immersion capability: SPlanApo’s starting with the 40* have a high NA. To max out the SPlanApo’s you are considering: the AplanatAchromat condenser is recommended.
The current condensor is perfectly matched to your current DPlan objectives (except for the immersion ones, spotted a 50* oil?).
Looks like you have the SC flip top condensor: so max useful objective NA is in the 0.9-1.0 range, and no immersion capability: SPlanApo’s starting with the 40* have a high NA. To max out the SPlanApo’s you are considering: the AplanatAchromat condenser is recommended.
The current condensor is perfectly matched to your current DPlan objectives (except for the immersion ones, spotted a 50* oil?).
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
Thanks you for the tip about the head because I was about to change it because it got damaged in transport(right eye piece holder was bent and I had to use pliers to open it up, the eyepiece went in abit forced).deBult wrote: ↑Mon Jan 08, 2024 3:58 pmLooks like you have the standard Trino head not the wide version: so no advantage in the wider view when switching from DPlan to SPlan objectives.
Looks like you have the SC flip top condensor: so max useful objective NA is in the 0.9-1.0 range, and no immersion capability: SPlanApo’s starting with the 40* have a high NA. To max out the SPlanApo’s you are considering: the AplanatAchromat condenser is recommended.
The current condensor is perfectly matched to your current DPlan objectives (except for the immersion ones, spotted a 50* oil?).
With the objectives, I have a 10, 20, 40, 50 oil and 100oil. I wanted to change them because they are dirty and I think they are scratched as well.
I will look for a condenser as well, im not fussy about oil at the moment. Sticking to normal observations.
-
- Posts: 6378
- Joined: Fri May 15, 2015 12:15 am
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
Just wondering if that is an iris equipped 100X objective and if that frame might have once had a DF condenser in it at times. That is often the main purpose of the extra illumination capacity when fluorescence isn't a factor.
At any rate, 100 watts gives you high resolution DF capacity and if your 50X oil is ,85 or lower that is prime for DF.
Regarding the objective N.A. when using a dry condenser. The condenser doesn't work like a shutoff valve, limiting the N.A. of the objective to that of the condenser. Rather, it is a combined effort, so a dry condenser working at .90-.95 ( seldom higher) and a 1.25 N.A. oiled objective in combination, yield an effective N.A. of around 1.13 or thereabouts.
Condenser N.A. is illusory when the condenser is a poorly corrected type like an abbe, because it's N.A. is only true on axis and a small distance off axis. Once spherical aberration takes control of the condenser lens system a little ways off axis, the N.A. falls off like a rock off of a cliff. That's why companies began offering dry aplanat achromats in earnest in the 80's. . Their peripheral N.A. is better than that of an oiled 1.25 abbe and a 1.25 abbe aspheric is superior to either, offering a wider field of a higher N.A. when oiled and is pretty even with an achromat aplanat when dry. It's an excellent inexpensive alternative to the difficulty encountered when trying to source a 1.3 or 1.4 achromat aplanat, which don't work the best when dry either. Paying for and using a high N.A. achromat condenser dry is about as logical as buying a row boat and using it on your lawn.
At any rate, 100 watts gives you high resolution DF capacity and if your 50X oil is ,85 or lower that is prime for DF.
Regarding the objective N.A. when using a dry condenser. The condenser doesn't work like a shutoff valve, limiting the N.A. of the objective to that of the condenser. Rather, it is a combined effort, so a dry condenser working at .90-.95 ( seldom higher) and a 1.25 N.A. oiled objective in combination, yield an effective N.A. of around 1.13 or thereabouts.
Condenser N.A. is illusory when the condenser is a poorly corrected type like an abbe, because it's N.A. is only true on axis and a small distance off axis. Once spherical aberration takes control of the condenser lens system a little ways off axis, the N.A. falls off like a rock off of a cliff. That's why companies began offering dry aplanat achromats in earnest in the 80's. . Their peripheral N.A. is better than that of an oiled 1.25 abbe and a 1.25 abbe aspheric is superior to either, offering a wider field of a higher N.A. when oiled and is pretty even with an achromat aplanat when dry. It's an excellent inexpensive alternative to the difficulty encountered when trying to source a 1.3 or 1.4 achromat aplanat, which don't work the best when dry either. Paying for and using a high N.A. achromat condenser dry is about as logical as buying a row boat and using it on your lawn.
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
The 100x objective is a regular one. I don't know about the DF condenser.apochronaut wrote: ↑Wed Feb 07, 2024 11:15 amJust wondering if that is an iris equipped 100X objective and if that frame might have once had a DF condenser in it at times.
What you see in that photo is what I got.
-
- Posts: 15
- Joined: Wed Sep 07, 2022 1:52 am
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
For most biological observations on your BH2-BHS, Splan Apo objectives would be the better choice due to their superior image quality and ease of use. Neo Splan NIC objectives excel in DIC microscopy,Wordle Unlimited but this technique might not be necessary for all your pond life observations.
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
Thanks for clarifying how objective N.A.- condensor N.A. relation, Apo.
-
- Posts: 2804
- Joined: Sat Mar 03, 2018 9:09 pm
Re: What is the diference beetween a Splan Apo and Neo Splan NIC??
Reporting this bot's posts doesn't seem to work. I feel like I reported one a year ago too.