4500K or 6000K LED?

Here you can discuss different microscopic techniques and illumination methods, such as Brightfield, Darkfield, Phase Contrast, DIC, Oblique illumination, etc.
Post Reply
Message
Author
tardibear
Posts: 12
Joined: Fri May 19, 2023 12:00 pm

4500K or 6000K LED?

#1 Post by tardibear » Sat May 27, 2023 10:07 pm

I think I'll get a Motic BA310E with a Halogen bulb (only because the seller doesn't offer a package with LED). I would like to add an LED module. I would then be able to compare and contrast between the Halogen vs the LED which might be fun at the beginning, but I'd imagine I'd just stick with the LED in the long run, especially since there might be a lot of turning on/off.

Motic offers two versions (AFAIK): 4500K and 6000K. In order to save costs, I'd like to get just one but I'm not sure which one to get

Scarodactyl
Posts: 2760
Joined: Sat Mar 03, 2018 9:09 pm

Re: 4500K or 6000K LED?

#2 Post by Scarodactyl » Sun May 28, 2023 12:15 am

Cri gets better on lower temperature leds. I personally like the 4kish range and dislike the blue cast higher temperatures get but tastes may vary.

Phill Brown
Posts: 603
Joined: Mon May 24, 2021 1:19 pm
Location: Devon UK.

Re: 4500K or 6000K LED?

#3 Post by Phill Brown » Sun May 28, 2023 6:38 am

If I remember correctly an 82c filter knocks out the blue.
That way you get both.
Usually possible to get a camera filter to drop over the field lens.

tardibear
Posts: 12
Joined: Fri May 19, 2023 12:00 pm

Re: 4500K or 6000K LED?

#4 Post by tardibear » Sun May 28, 2023 9:21 am

Phill Brown wrote:
Sun May 28, 2023 6:38 am
If I remember correctly an 82c filter knocks out the blue.
That way you get both.
Usually possible to get a camera filter to drop over the field lens.
When using filters, will there not be any loss of spectrum?

Phill Brown
Posts: 603
Joined: Mon May 24, 2021 1:19 pm
Location: Devon UK.

Re: 4500K or 6000K LED?

#5 Post by Phill Brown » Sun May 28, 2023 9:35 am

With a 6000k LED the difference may be preferable.
With incandescent it's usually the other way with a blue filter or ND.

Hobbyst46
Posts: 4275
Joined: Mon Aug 21, 2017 9:02 pm

Re: 4500K or 6000K LED?

#6 Post by Hobbyst46 » Sun May 28, 2023 10:09 am

tardibear wrote:
Sun May 28, 2023 9:21 am
Phill Brown wrote:
Sun May 28, 2023 6:38 am
If I remember correctly an 82c filter knocks out the blue.
That way you get both.
Usually possible to get a camera filter to drop over the field lens.
When using filters, will there not be any loss of spectrum?
The blue peak in the spectrum of 6000-6500K LEDs is especially strong.
The 82C or alternatively KR-12 orange-brown filter will cut the intensity of the blue peak to a considerable extent. Will make the 6000K spectrum more similar to a 3000K spectrum ("warm-white LED"). Overall brightness of the KR-12 filtered light is reduced, but is still acceptable.

For certain purposes the strong blue peak is an advantage (shorter wavelengths mean better resolution).
But 4500K appears more close to "neutral white" than 6000K.
And blue-filtered halogen beats them all IMHO...

ddy5
Posts: 78
Joined: Sun May 03, 2020 12:37 pm
Location: Maryland, USA

Re: 4500K or 6000K LED?

#7 Post by ddy5 » Sun May 28, 2023 1:06 pm

My preference is like Sarcodactyl's. My LED microscope light has a variable color temperature, and I quickly gravitated to around 4100°K as most pleasing.

Post Reply