If you have an Olympus BH2 and a 3D printer.
https://drive.google.com/file/d/14VRljG ... p=drivesdk
Darkfield/Rheinberg on the BH2
Darkfield/Rheinberg on the BH2
--- If you're in the Kansas City area and you need help with an Olympus BH-2 scope, PM me. I love to work on these things ---
Re: Darkfield/Rheinberg on the BH2
Thanks for sharingcarlh6902 wrote: ↑Sat Aug 20, 2022 2:41 amIf you have an Olympus BH2 and a 3D printer.
https://drive.google.com/file/d/14VRljG ... p=drivesdk
Your article is my introductory guide to microscopy
This BH2-AAC Accessory Kit paper shows your continued enthusiasm for the BH2 series
Although my BHS is already configured with bh2-NC AH-PC AH-AAC BH2-DCW condenser, so I should not use that document.
Thanks again for your enthusiasm!
Sincerely WJL
Micrographers from China, thanks to the forum for providing a platform for exchange
Re: Darkfield/Rheinberg on the BH2
Thanks, I was wondering how to do this, as I've seen no place to put patches below the condenser on the images of hopefully soon (Thursday) mine BH-2...
Last edited by imkap on Sun Aug 21, 2022 3:24 pm, edited 1 time in total.
Re: Darkfield/Rheinberg on the BH2
http://www.alanwood.net/downloads/olymp ... ochure.pdf
Inserted directly into the hole at the bottom of AAC,
Car posted a few years ago how to make a darkfield KIT with PVC water pipes, this time he just refined the idea.
Inserted directly into the hole at the bottom of AAC,
Car posted a few years ago how to make a darkfield KIT with PVC water pipes, this time he just refined the idea.
Micrographers from China, thanks to the forum for providing a platform for exchange