Replace Nikon light with LED

Here you can discuss different microscopic techniques and illumination methods, such as Brightfield, Darkfield, Phase Contrast, DIC, Oblique illumination, etc.
Post Reply
Message
Author
HarryB
Posts: 2
Joined: Wed Dec 01, 2021 9:59 pm

Replace Nikon light with LED

#1 Post by HarryB » Mon Jan 30, 2023 4:29 pm

Has anyone used this source. https://www.kayjaopt.com/product-content-119.html or http://www.oricszlab.com/products_detai ... 73504.html

I want to replace the bottom source on my Nikon Optiphot-POL. Any other inexpensive suggestions are welcome. I'm trying to get pricing but have not gotten a reply yet.

Hobbyst46
Posts: 4277
Joined: Mon Aug 21, 2017 9:02 pm

Re: Replace Nikon light with LED

#2 Post by Hobbyst46 » Mon Jan 30, 2023 5:43 pm

This potential market of this LED lamp seems to be low-budget projects in the industry and/or clinics and maybe academic or educational institutes.
Because, on the one hand, it is designed as a source of tailored (wavelength) monochromatic light for excitation of fluorescence. On the other hand,
its declared power (3W) is relatively low for microscopy. Especially since it appears to be too large to fit into the base of a microscope.
So (if I am correct) it is intended to be attached to the rear port of the base, but then the optical path becomes long.
I would ask the seller to provide details and a demonstration of its use on specific microscopes.

For non-fluorescence hobby use on an Optiphot, a specifically (commercial) built 10-20W white light LED lamp
would be better and, for a price of ~ 200 USD, cheaper IMHO.

Scarodactyl
Posts: 2775
Joined: Sat Mar 03, 2018 9:09 pm

Re: Replace Nikon light with LED

#3 Post by Scarodactyl » Mon Jan 30, 2023 11:07 pm

A collimated LED is really just an emitter (preferrably undomed) mounted on a heat sink with an aspheric lens in front of it to act as a condensing lens. If you have a 3d printer it is easy to buy the necessary parts and hook them all together for much less than a complete system.

Dennis
Posts: 674
Joined: Wed May 13, 2015 3:19 pm
Location: New Jersey, USA

Re: Replace Nikon light with LED

#4 Post by Dennis » Tue Jan 31, 2023 7:13 pm

Harry,

For an experiment if you have a Harbor Freight Tools store near you they have several LED lights priced VERY inexpensive.
Maybe just a temp fix or whatever.
https://onedrive.live.com/?authkey=%21A ... 02&o=OneUp

Post Reply