Greetings from Reda in Poland

What is your microscopy history? What are your interests? What equipment do you use?
Post Reply
Message
Author
LomoBen
Posts: 27
Joined: Wed Mar 02, 2022 5:03 pm
Location: Reda,Poland

Greetings from Reda in Poland

#1 Post by LomoBen » Wed Mar 02, 2022 5:22 pm

Hi, my name is Ben and I started my microscopehobby in the seventies, for a long time I did not use my microscope,but now I am retired and I want to spend more time into this hobby.
I have a Lomo Biolam D1 misroscope with monotube as well as binocularhead, normal and darkfieldcondensor, Lomo Koehler illumination original as well as LED adaptation, camera adapter for 4:3
systemcamera's ,specimendriver CT-12, objectives: 3.5x/0,10 plan,3.7x/0.11, 8x/0.20, 20x/0.40, 40x/0.65, 40x/0.75 W.I., 85x/1.0 W.I., 90x/1.25 O.I.
And a lot of N.B.S. slides and slides I created myself in the seventies.
Later I will post some foto's of my stuff.
So hello to everybody on this forum and I hope to learn a lot here.. ;)

mikemarotta
Posts: 66
Joined: Fri Jan 28, 2022 1:27 am
Location: Texas
Contact:

Re: Greetings from Reda in Poland

#2 Post by mikemarotta » Sat Mar 05, 2022 5:44 pm

Welcome to the board. You seem quite knowledgeable. I look forward to your posts. I have been following your progress refurbishing your microscope. Your workmanship and patience are impressive.

Best Regards,
Mike M.
-----------------------------
Michael E. Marotta
Technical Writer

LomoBen
Posts: 27
Joined: Wed Mar 02, 2022 5:03 pm
Location: Reda,Poland

Re: Greetings from Reda in Poland

#3 Post by LomoBen » Sat Mar 05, 2022 9:13 pm

Thanks for the welcome, my first post is in the chapter Microscopes and objectives, problems with my 85/1.0 waterimmersion...

Post Reply