You mean Nf's 5-position revolver? It will fit later Microval stands and some LOMO stands (but for them it will need some modification), can't say anything about others.
Jena oo
Re: Jena oo
Gear list:
CZJ NfPk and Polmi A w/ 45mm apo objectives, Phv, Epi Pol, trinocular
Gamma Hungary 3D-condenser
LOMO ОИ-28 Fluorescence Attachment
Set of Leitz Photar macro lens
Nikon D500 DSLR
LOMO МС-2 microtome
CZJ NfPk and Polmi A w/ 45mm apo objectives, Phv, Epi Pol, trinocular
Gamma Hungary 3D-condenser
LOMO ОИ-28 Fluorescence Attachment
Set of Leitz Photar macro lens
Nikon D500 DSLR
LOMO МС-2 microtome
Re: Jena oo
Thanks for your replies. Adapting the revolver, that was not such a great idea.
Just to wrap up, here the drawing of the RMS-M19 flanged adapter from RafCamera, hope they don't mind (free advertising... ). What is important is the 20.5mm, 2mm high bore, that centers the M19 mount. The "flangeless" adapter (a ring with M19 inside and RMS outside) may be hit or miss, as this 20.5 mm could hit the RMS female screw.
This adapter adds 7mm to parfocal length to the objectives. Optically should be ok - they're infinite. Some issues may arise with the stage focusing - as will need to be 7mm more down, from 45mm parfocal objectives.
- Attachments
-
- RMS-M19Adapter drawing RafCamera
- rms_m_-to-m19x0_75f_drawing_1.jpg (27.56 KiB) Viewed 825 times