Opax objectives
-
- Posts: 5
- Joined: Sun Jan 09, 2022 5:11 pm
Opax objectives
Hi everyone,
I have an opax compound microscope (serial no. 261229) and am wondering where I can get objectives for it. It has the option for 4 objectives. At the moment there are 3 present 4x, 10x and 40x. I would like to add a 20x objective.
Have been looking online but can't find any opax objectives. Are there other brands like vickers that are compatible with opax? Any advice is appreciated.
Mick
I have an opax compound microscope (serial no. 261229) and am wondering where I can get objectives for it. It has the option for 4 objectives. At the moment there are 3 present 4x, 10x and 40x. I would like to add a 20x objective.
Have been looking online but can't find any opax objectives. Are there other brands like vickers that are compatible with opax? Any advice is appreciated.
Mick
Re: Opax objectives
Hello, Mick
Sorry, I don’t recognise the Opax name … so a couple of questions:
MichaelG.
.
Edit: __ Is it anything like this one ? : https://www.qsl.net/g6pje/OPAX.html
Sorry, I don’t recognise the Opax name … so a couple of questions:
- Does it have standard RMS objective threads ?
- Is it 160mm or 170mm tube-length, or is it ‘infinity ?’
MichaelG.
.
Edit: __ Is it anything like this one ? : https://www.qsl.net/g6pje/OPAX.html
Too many 'projects'
-
- Posts: 5
- Joined: Sun Jan 09, 2022 5:11 pm
Re: Opax objectives
Hi Michael.
Thanks for the reply.
On objectives only following is given. 40x: s40 0.65, 10x: 10 0.25 and 4x: 4 0.10
Objectives are threaded, but not sure if its rms size
Thanks for the reply.
On objectives only following is given. 40x: s40 0.65, 10x: 10 0.25 and 4x: 4 0.10
Objectives are threaded, but not sure if its rms size
-
- Posts: 5
- Joined: Sun Jan 09, 2022 5:11 pm
Re: Opax objectives
Here's a picture of similar scope
- Attachments
-
- 5af2048fe3730101f198170c.jpeg (78.21 KiB) Viewed 1327 times
-
- Posts: 5
- Joined: Sun Jan 09, 2022 5:11 pm
Re: Opax objectives
A view from front of similar microscope
- Attachments
-
- 1100119908_PREVIEW.jpeg (46.71 KiB) Viewed 1325 times
-
- Posts: 5
- Joined: Sun Jan 09, 2022 5:11 pm
Re: Opax objectives
The second picture would be the same model as mine
Re: Opax objectives
I will take a wild guess that it’s 160mm tube length
RMS thread is 0.8” diameter and 36 threads per inch
MichaelG.
.
Ref. http://www.science-info.net/docs/etc/RMSthread.jpg
Edit: __ For the overall DIN standard dimensions See Fig.8 here :
https://www.edmundoptics.com/knowledge- ... bjectives/
RMS thread is 0.8” diameter and 36 threads per inch
MichaelG.
.
Ref. http://www.science-info.net/docs/etc/RMSthread.jpg
Edit: __ For the overall DIN standard dimensions See Fig.8 here :
https://www.edmundoptics.com/knowledge- ... bjectives/
Too many 'projects'