Has anyone got one of these?
I acquired one of the field lenses quite a while back (last year). I've been using it with my DIY rail system (not a Laborlux!). However, I was wondering what the correct/optimum distance between the top of the illuminator and bottom of the condenser might be? Just trying to tweak things. If anyone can give me a measurement, that would be great.
Thanks
Louise
Anyone Got a Laborlux 11?
-
- Posts: 1167
- Joined: Tue Jul 07, 2020 1:51 pm
- Location: Scotland
Anyone Got a Laborlux 11?
A Nikon CF plan 20x; A Swift 380T; A DIY infinity corrected focus rail system with a 40x/0.65 Olympus Plan, a 10x/0.30 Amscope Plan Fluor, and a 20x/0.75 Nikon Plan Apo
Re: Anyone Got a Laborlux 11?
Hi Louise - only have Laborlux D and 12 scopes left - which are a bit different.
However, I'd imagine that if you set up Kohler illumination on your rig, the condenser will tell you precisely where it wants to be spaced. Should work if you have the complete illuminator and proper condenser. Might not work (Kohler illumination) if it's not a compatible Leitz condenser or you have just the field lens and not the entire illuminator base.
If the 11 doesn't have a field iris, could be you could place a pinhole on the field lens and approximate Kohler illumination and spacing?
However, I'd imagine that if you set up Kohler illumination on your rig, the condenser will tell you precisely where it wants to be spaced. Should work if you have the complete illuminator and proper condenser. Might not work (Kohler illumination) if it's not a compatible Leitz condenser or you have just the field lens and not the entire illuminator base.
If the 11 doesn't have a field iris, could be you could place a pinhole on the field lens and approximate Kohler illumination and spacing?
-
- Posts: 1167
- Joined: Tue Jul 07, 2020 1:51 pm
- Location: Scotland
Re: Anyone Got a Laborlux 11?
Well, to properly set up Kohler then I'd need the spacing to the condenser to be within certain limits to start with? I have a feeling I currently have a bit too much distance. If someone can tell me roughly what the spacing limts on a Laborlux are, that would be helpful (= reassuring!). I have the illuminator as in the photo above and viz:PeteM wrote: ↑Tue Oct 04, 2022 10:48 pmHi Louise - I'd imagine that if you set up Kohler illumination on your rig, the condenser will tell you precisely where it wants to be spaced. Should work if you have the complete illuminator and proper condenser. Might not work (Kohler illumination) if it's not a compatible Leitz condenser or you have just the field lens and not the entire illuminator base.
Thanks
Louise
A Nikon CF plan 20x; A Swift 380T; A DIY infinity corrected focus rail system with a 40x/0.65 Olympus Plan, a 10x/0.30 Amscope Plan Fluor, and a 20x/0.75 Nikon Plan Apo
-
- Posts: 1167
- Joined: Tue Jul 07, 2020 1:51 pm
- Location: Scotland
Re: Anyone Got a Laborlux 11?
It doesn't look like anybody has one, but never mind. Looking at a number of photos of the Laborlux 11, with the same illuminator, on the net, I estimate the distance to be of the order of the diameter of the illuminator. Having dropped the stage down somewhat I can adjust the condenser to focus on the field diaphragm using a 20x objective ok, so that seems reasonable. More fettling to do!
Louise
Louise
A Nikon CF plan 20x; A Swift 380T; A DIY infinity corrected focus rail system with a 40x/0.65 Olympus Plan, a 10x/0.30 Amscope Plan Fluor, and a 20x/0.75 Nikon Plan Apo